Manual

Parameter detail > 11
H- PARAMETER
Specifies a font for human readable characters. If this parameter is omitted or invalid, the
printer functions with its default value. Refer to “Default parameter values” on page 12.
If the selected font is not available, the default is used.
V- PARAMETER
Specifies the height of a bar in points. (1pt = 1/72 inch.) If the parameter is omitted or
invalid, the default value is assumed. Refer to “Default parameter values” on page 12.
The sign and decimal part of the value supplied are ignored.
B- PARAMETER
Specifies the width of (black) bars in units of 1/600 inch. Up to four values may be
specified, separated by commas. In barcodes having only two bar widths the third and
fourth values are ignored. If the parameter is omitted, the default value is assumed. Refer
to “Default parameter values” on page 12.
If values are invalid or 0, the default value is assumed. Sign and decimal parts are ignored.
In barcodes that have only two bar widths, the specifications of #3 and #4 are ignored.
For barcodes with fixed bar width this parameter is ignored.
When changing the bar width with this command, the bar width ratios should be the same
or close to the default width ratio.
VALUE FONT USED
0 Courier Bold (default)
1 Letter Gothic Bold
2 Univers Bold
3 Univers Condensed Bold
4CG-Times Bold
100~104 Medium weight versions of 0~4.
105 OCR–B
200~204 Italic versions of 0~4.
300~304 Same fonts as 0~4.
400~404 Bold Italic versions of 0~4.
VALUE BAR HEIGHT (POINTS)
<3 Default value is used.
3~1000 3~1000pt
>1000 1000pt
PARAMETER FUNCTION
#1 Width of thinnest bar.
#2 Width of second thinnest bar.
#3 Width of third thinnest bar.
#4 Width of widest bar.