Operation Manual

8 SPECIFICATIONS AND OPTIONS
206 e-STUDIO167/207/237 Specifications
e-STUDIO167/207/237 Specifications
y These specifications vary depending on the copying conditions and the environment.
y Specifications and appearance are subject to change without notice in the interest of product
improvement.
Model name DP-1670/2070/2370
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fusing method 2 halogen lamps
Photosensor type OPC
Original scanning system Flat surface scanning system
(When the Reversing Automatic Document Feeder / Automatic
Document Feeder is installed: Fixed scanning system by feeding
the original)
Original scanning sensor Linear CIS sensor
Scanning light source LED
Resolution Scanning 600 dpi x 600 dpi
Writing 2400 dpi x 600 dpi (Smoothing process)
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. A3
Acceptable copy
paper size
Drawer A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP,
13"LG
Bypass A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R,
COMP, 13"LG
Acceptable copy
paper weight
Drawer
64 - 80 g/m
2
Bypass
64 - 80 g/m
2
(for continuous feed)
50 - 163 g/m
2
(for single feed)
64 - 80 g/m
2
(When the Automatic Duplexing Unit is used.)
Warm-up time Approx. 25 seconds
First copy time (A4 portrait) Approx. 7.6 seconds (e-STUDIO167/207), Approx. 7.5 seconds (e-
STUDIO237)
Continuous copy speed See  P.207 “Continuous copying speed”
Multiple copying Up to 999 copies (digital key entry)
Excluded image
width
Copy Leading edge: 3.0±2.0 mm, Trailing edge: 2.0±2.0 mm,
Both edges: 2.0±2.0 mm
Printer Leading edge: 5.0±2.0 mm, Trailing edge: 5.0±2.0 mm,
Both edges: 5.0±2.0 mm
Reproduction ratio Actual size 100±0.5%
Zoom 25 - 200% (in 1% increments)
Storage capacity Max. 250 sheets or until the memory is full (TOSHIBA’s own chart)
Paper supply Drawer
250 sheets (80 g/m
2
)
Bypass
100 sheets (80 g/m
2
)
Loading capacity for the receiving
tray
Approx. 250 sheets (64 g/m
2
)
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 7 exposure steps
USB interface USB2.0 (Hi-Speed)
Environment (for normal use) Temperature: 10 º - 30 ºC, Humidity: 20 - 85% (No condensation)
Power requirements 220 - 240 V±10%, 8 A (50/60 Hz)
Power consumption 1.6 kW or less (including optional equipments)
Dimensions (equipment only) 600 mm (W) x 658.6 mm (D) x 462.5 mm (H)
Weight Approx. 32.5 kg
Space occupied (equipment only) 948 mm (W) x 658.6 mm (D)