Manual

User’s Manual EN-53
dynadock™ W20
I cannot get the
computer
to connect and dock
(the indicator light does
not turn solid green).
n The computer may be too far away from the
dynadock™; move closer to the
dynadock™.
n Make sure that there is nothing between the
computer and the dynadock™ (for example,
walls/monitors).
n Make sure the wireless USB adaptor is
properly connected to your computer.
n Make sure the adaptor’s antenna and the
dynadock’s antenna are in the upright
position.
n Verify that the settings in the Wireless USB
Manager utility are configured correctly to
enable wireless communication. For more
information, please see “Using the Wireless
USB Manager” on page 29.
The connection to the
dynadock™ has been
lost.
The computer may be out of wireless
communication range. Bring the computer
within close range of the dynadock™ to
automatically reconnect.
The computer may be in standby/sleep/
hibernation mode. The computer will re-connect
when it resumes from standby/sleep/
hibernation.
The USB adaptor may have been disconnected.
Re-connect the USB adaptor to the computer.
There may be an obstruction between the
dynadock™ and your computer that is
preventing wireless communication. Remove
the obstruction.
Problem(s) Solution(s)