Manual

User’s Manual EN-39
dynadock™ W20
Supported display modes
Three components make up the display mode: resolution, color depth, and
refresh rate. These components are defined as follows.
n Resolution: In common usage, the resolution is the number of pixels
displayed on the screen horizontally and vertically.
n Color Depth: The number of different colors that can be shown on the
screen at the same time.
n Refresh rate: The speed at which the entire screen is rescanned.
Higher frequencies reduce flicker.
The dynadock™ supports the following display modes:
Please note the following:
n Interlaced modes are not supported.
n The display modes listed above may not be supported by your monitor,
or your monitor may offer additional modes not supported by the
dynadock™. For information on display modes supported by your
monitor, be sure to check the documentation supplied with your monitor.
Select a mode that both the dynadock™ and the monitor support.
n Placing a monitor into an unsupported mode for long periods can
damage it.
Resolution Refresh Rates (Hz) Color Depth
640x 480 60, 72, 75
All modes available in both
16-bit and 32-bit color
800 x 600 56, 60, 72, 75
1024 x 768 60, 70, 75
1152 x 864 75
1280 x 768 60, 75
1280 x 960 60, 75
1280 x 1024 60, 75
1366 x 768 60
1400 x 1050 60
1440 x 900 60
1600 x 1200 60
1680 x 1050 60
1920 x 1080 60