Manual

EN-18 User’s Manual
dynadock™ W20
Chapter 1
Setting Up the dynadock™ and
Connecting Peripherals
Setting up the dynadock™
This section provides instructions on setting up the dynadock™. You will
need to perform the following steps in the order shown:
1. Assemble the dynadock™
2. Connect the power adaptor
3. Install the software
4. Connect the dynadock™ to your computer
For more information on each step, refer to the appropriate section on the
indicated page.
Assemble the dynadock™
Slide the dynadock™ onto the base as shown below.
(Sample Illustration) Attaching the base to the dynadock™