XVS - DVS - HVS Digital Video Recorder Hardware Manual model no. Please carefully read these instructions before using this product. Save this manual for future use.
ii
Surveillix™ XVS / DVS / HVS Hardware Manual Manual Edition 29059AD – MAY 2010 Printed in USA No part of this documentation may be reproduced in any means, electronic or mechanical, for any purpose, except as expressed in the Software License Agreement. Toshiba shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND.
LIMITED WARRANTY DIGITAL VIDEO RECORDER The Imaging Systems Division of Toshiba America Information Systems, Inc. (“ISD”) makes the following limited warranties. These limited warranties extend to the Original End-User (“You[r]”). Limited Two (2) Year Warranty of Labor and Parts The Imaging Systems Division of Toshiba America Information Systems warrants this product and parts against defects in material or workmanship for a period of two years from the date of original retail purchase by the end-user.
IMPORTANT SAFEGUARDS 1. Read Owner’s Manual – After unpacking this product, read the owner’s manual carefully, and follow all the operating and other instruction 2. Power Sources – This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home or business, consult your product dealer or local power company 3.
IMPORTANT SAFEGUARDS, continued 16. Damage Requiring Service – Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions: a. b. c. d. When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the unit. If the unit has been exposed to rain or water. If the unit does not operate normally by following the operating instructions.
NOTES ON CLEANING Use a soft dry cloth for cleaning. For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the DVR. If using a chemical saturated cloth to clean the unit, follow that product’s instructions. NOTES ON MAINTENANCE This DVR is designed to last for long periods of time.
WARNING TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RACK MOUNT INSTRUCTIONS Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
CE NOTICE This product is in conformity with the following European Directives: ELECTROMAGNETIC COMPATIBILITY DIRECTIVE, 89/336/EEC (as amended by 92/31/EECand by Article 5 of 93/68/EEC) per the provisions of: EN55022:2006 EN61000-4-2:1995+A1+A2:2001 EN55024:1998+A1:2001+A2:2003 EN61000-4-3:1995+A1:2002 EN61000-4-8:1994+A1:2001 EN61000-3-2:2006 EN61000-4-4:1995+A1+A2:2004 EN61000-4-11:2004 EN61000-3-3:1995+A1:2001+A2:2005 EN61000-4-5:1995+A1:2001 LOW VOLTAGE DIRECTIVE, 73/23/EEC (as amended by Ar
Table of Contents PREFACE .................................................................................................................................................................... 13 ABOUT THIS GUIDE .............................................................................................................................................. 13 TECHNICIAN NOTES ..........................................................................................................................................
Attaching the 4-Pin Adapter (240V PPS models) ........................................................................................... 36 MAKING CONNECTIONS ON DVS / HVS .............................................................................................................. 37 Connecting a Video Source ................................................................................................................................ 37 8 Channel .........................................................
PREFACE ABOUT THIS GUIDE This manual is a setup and maintenance guide that can be used for reference when setting up the DVR and for troubleshooting when a problem occurs. Only authorized personnel should attempt to repair this unit. Toshiba reserves the right to make changes to the DVRs represented by this manual without notice.
INTRODUCTION PRODUCT DESCRIPTION A Surveillix XVS / DVS / HVS is a DVR, a server that performs as a High Definition Digital Recorder. By utilizing the many features of a computer, including processing power, storage capacity, graphics compression, and security features, the DVR is more powerful than the analog recorders of the past. The Surveillix DVR server software comes pre-configured for fast and seamless integration within your existing IT infrastructure.
FEATURES Toshiba’s Surveillix DVRs include the following new features: • Optimized and Designed for Microsoft® Windows XP Embedded® • Up to 32 Camera Inputs • Supports up to 16 Relay Outputs on Alarm Activation • Supports up to 16 Sensor Inputs for Alarm Control • Remote System Operation & Configuration • Supports Multiple Simultaneous Remote Connections • PAN / TILT / ZOOM Controls • Simultaneous Video Search, Playback and Backup • Video Indexes for Easy Searching • Multiple Levels o
CONTROLS AND CONNECTIONS This chapter includes the following information: • Input / Output Connector Locations • Front Panel Controls and LEDs • Rear Panel Connectors
FRONT PANEL CONTROLS The front panel of the DVR contains the devices that will be commonly used for data removal, retrieval, and backup replacement.
DVS / HVS DVD±RW Drive Hard Drive Activity & Power LEDs Hard Drive Array LOCK OPEN LOCK OPEN LOCK OPEN LOCK OPEN Cooling Fan Air Intake On / Off Power Switch USB Ports
REAR PANEL CONNECTORS The rear panel of the DVR contains the connectors used to attach cameras, sensors, and relays to the DVR.
16 Channel (240) AC Power Connector Adapter for BNC Looping Output Cable BNC Connectors for Video Input Looping Output Termination Sensors Inputs Control Outputs Cooling Fan RCA Video Out 1394 Audio Inputs DVI-D RS-485 Interface Network Port PS/2 Mouse Input PS/2 Keyboard Input Audio USB Ports DVI-D Port Fire Wire SVGA Output • Line In – line level • Speaker Out • Microphone In – not used 16 Channel (240V) AC Power Connector Adapter for BNC Looping Output Cable BNC Connectors for
DVS/HVS 8/16 Channel Control Alarm Outputs BNC Connectors for Video Input / Looping Output Sensor Inputs Looping Termination Switch CH 1 in CH 2 in CH 3 in CH 1 Out CH 2 Out CH 3 Out CH 4 in CH 5 in CH 6 in CH 7 in CH 8 in CH 9 in CH 10 in CH 11 in CH 12 in CH 13 in CH 14 in CH 15 in CH 16 in CH 4 Out CH 5 Out CH 6 Out CH 7 Out CH 8 Out CH 9 Ou t CH 10 Out CH 11 Out CH 12 Out CH 13 Out CH 14 Out CH 15 Out CH 16 Out ON OFF ON OFF CONTROL COM 1 2 3 4 5 6 7 8
32 Channel 16 CH Cable Adapters/Looping Outputs* Control Alarm Outputs BNC Connectors for Video Input Looping Termination Switch Sensor Inputs CH 1 in CH 2 in CH 3 in CH 17 in CH 18 in CH 19 in CH 4 in CH 5 in CH 6 in CH 7 in CH 8 in CH 9 in CH 10 in CH 11 in CH 12 in CH 13 in CH 14 in CH 15 in CH 20 in CH 21 in CH 22 in CH 23 in CH 24 in CH 25 in CH 26 in CH 27 in CH 28 in CH 29 in CH 30 in CH 31 in CH 16 in CH 32 in ON OFF BNC A ON OFF CONTROL COM SENSOR BNC B 1
PCI Card Configurations 240 PPS 8/16 Channel PCI Configuration RCA Video Out RS-485 Interface Audio Inputs 240 PPS 32 Channel PCI Configuration RCA Video Out Audio Inputs RS-485 Interface 480 PPS 16 Channel PCI Configuration RCA Video Out SVGA Monitor Output DVI Output RS-485 Interface Audio Input Cable Adapter
480 PPS 32 Channel PCI Configuration SVGA Monitor Output DVI Output RCA Video Out RS-485 Interface Audio Inputs
GETTING STARTED This chapter includes the following information: • Included Components • Setting up the DVR Hardware • Optional Components
IDENTIFYING INCLUDED COMPONENTS Surveillix™ DVRs come with a mouse, keyboard and selected software and cables. Identify the following components to make sure everything has been properly included with the new DVR. If any of the following items are missing, contact the dealer to arrange a replacement.
OPTIONAL COMPONENTS To fully utilize the DVR’s potential; several optional Surveillix components are listed below. Contact the dealer for more information. Extra Video Storage Hard Drive Each DVR has a virtually unlimited storage potential. Add additional Video Data Hard Drives to extend the amount of Video Data the DVR system can store before overwriting older data. UPS UPS Power Backup UPS Power Backups allow your DVR to remain fully functional even in the event of a power failure.
KEYBOARD SETUP To attach the keyboard to the DVR, plug the end of the Keyboard into the keyboard PS/2 Port located on the back of the machine. The keyboard PS/2 Port can be identified by the purple color. Refer to the Rear Panel Connectors diagram for more information. MOUSE SETUP To attach the mouse to the DVR, plug the end of the mouse into the mouse PS/2 Port located on the back of the machine. The mouse PS/2 Port can be identified by the green color. The mouse uses a cursor called a pointer.
MONITOR SETUP The DVR has the following connections available to attach a monitor. SVGA Output To VGA Monitor. DVI-D Output To TV / Digital Monitor Attach the monitor or monitors to the rear of the DVR using the cable supplied by the monitor manufacturer. Refer to the monitor manual for detailed information on how to setup and use it.
MAKING CONNECTIONS ON AN XVS Connecting a Video Source There are different types of Video Sources that can be plugged into the XVS including DVD players, VHS players, and CCTV Cameras. The back of the XVS contains up to 16 video inputs depending on the model. The connectors use the BNC standard. 4 Channel Channel 1 Channel 2 Channel 3 Channel 4 16 Channel The video inputs are 75 Ώ BNC connectors. Plug one end into the video source (DVD, Camera, etc.
Connecting Sensors to the XVS Each XVS may have up to 16 Sensor inputs. These inputs can be used with devices such as infrared devices, motion device, glass breakage alarms, door and window trips, and many more. The Sensors can be set to Normally Open or Normally Closed inside the software. There is 1 Common Grounds (-) and 4 sensor inputs (+). There is no power supplied to the ports so an external power supply must be used if power is necessary.
Connecting Control Outputs to the XVS Each XVS may have up to 4 Control Outputs. These outputs can be used to trigger devices such as Sirens, Phone Dialers, Lights, and any other relay activated device. There is no power supplied to the ports. Use an external power supply if necessary. 16 Channel Siren, Alarm, Outside Relays (+) (-) External Power Supply (DC 12V) 4 Channel Siren, Alarm, Outside Relays (Common) External Power Supply (DC 12V) (Common) Use 12V, below 300mA.
Looping Outputs The 16 Channel XVS may have up to 16 Looping outputs. Depending on the destination of the outputs, each output may have to be terminated. The outputs are located on the BNC Connector Cable. Attach the cable to the input for the BNC Connector Cable highlighted below. The video inputs are 75 Ώ BNC connectors. Make sure there is a video source connected to the input and then connect a cable to the Channel Out on the BNC Connector Cable.
Connecting a PTZ Camera Setting up a PTZ Camera is simple. The DVR comes preassembled with an internal PTZ adapter. The cabling may be run up to 4,000 ft using 22 Gauge Twisted Pair. It is important to understand how the PTZ connects to the DVR. The DVR outputs an RS-232 signal and converts in to an RS-485 signal which is then sent to the PTZ camera. Attaching the 3-Pin PTZ Adapter 1. Locate the PTZ adapter cable. 2. Connect the two wires of the PTZ adapter to the PTZ camera.
MAKING CONNECTIONS ON DVS / HVS Connecting a Video Source There are different types of Video Sources that can be plugged into the DVR including DVD players, VHS players, and CCTV Cameras. The back of the DVR contains up to 32 video inputs depending on the DVR model. The connectors use the BNC standard.
Connecting Sensors to the DVS / HVS Each DVR has up to 16 Sensor inputs. These inputs can be used with devices such as infrared devices, motion device, glass breakage alarms, door and window trips, and many more. The Sensors can be set to Normally Open or Normally Closed inside the software. There are 4 Common Grounds (-) and 16 sensor inputs (+). There is no power supplied to the ports so an external power supply must be used if power is necessary.
Looping Outputs The 8/16 Channel DVS / HVS has up to 16 looping outputs. Depending on the destination of the looping outputs, each one may have to be terminated.
Connecting a PTZ Camera Setting up a PTZ Camera is simple. The DVR comes preassembled with an internal PTZ adapter. The cabling may be run up to 4,000 ft using 22 Gauge Twisted Pair. It is important to understand how the PTZ connects to the DVR. The DVR outputs an RS-232 signal and converts in to an RS-422/485 signal which is then sent to the PTZ camera. Attaching the 3-Pin Adapter 1. Locate the PTZ adapter cable. 2. Connect the two wires of the PTZ adapter to the PTZ camera.
HARD DRIVE ARRAY (DVS / HVS ONLY) Button Lock Release Handle Handle Release Reset Button LOCK OPEN LOCK OPEN Power Buttons LOCK OPEN LOCK Temperature Alarm Light OPEN Swapping a Hard Drive 1. Press the Hard Drive Power Button to turn off power to the hard drive being removed. 2. Turn the Button Lock to the open position and push the Handle Release Button 3. Pull the Release Handle outward while removing the hard drive. Reverse steps to install.
TURNING ON THE DVR Once the cables and adapters have been properly connected it is time to turn on the power. To turn on the power follow these steps: 1. Turn on the monitor and any external peripherals (ex. Printers, External Storage Devices, etc.) connected to the DVR. 2. Turn on the Secondary Power Switch located in the rear of the DVR. 3. Turn on the main power switch located on the front of the DVR. The DVR will run a series of self-tests.
APPENDIX: SPECIFICATIONS
XVS SPECIFICATIONS 4CH 120PPS Video Format Video Inputs (BNC) Recording Rate Live Viewing Rate (PPS) Audio Recording 16CH 240PPS NTSC/PAL 4 Video Outputs Looping Outputs (BNC) 16CH 240VPPS 16 16 DVI-D x 1, SVGA x 1 (Primary Display), RCA x 1 (Spot Monitor) 0 16 120 PPS 360×240 120 PPS 720×240 60 PPS 720×480 240 PPS 360×240 120 PPS 720×240 60 PPS 720×480 16 240 PPS 360×240 120 PPS 720×240 60 PPS 720×480 120 240 480 RCA x 4 RCA x 4 RCA x 4 Sensor / Alarm Inputs 4 16 16 Alarm Outputs
DVS/HVS SPECIFICATIONS 240 8 480 16 32 Video Format Video Inputs (BNC) 32 16 32 NTSC/PAL 8 16 32 DVI-D x 1, SVGA x 1 (Primary Display), RCA x 1 (Spot Monitor) RCA x4 (480PPS model only) Video Outputs Looping Outputs (BNC) 16 8 16 Recording Rate 240 PPS 360×240 120 PPS 720×240 60 PPS 720×480 Live Viewing Rate (PPS) 240 Audio Recording 32 16 480 PPS 360×240 240 PPS 720×240 120 PPS 720×480 480 480 4 (optional 16 channel available) 32 16 (yes) 4 (yes) (yes) Sensor / Alarm In
