EVR - DVR - HVR Digital Video Recorder Hardware Manual DVR8-X EVR8-X HVR8-X DVR16-X EVR16-X HVR16-X EVR32-X HVR32-X model no. Please carefully read these instructions before using this product. Save this manual for future use.
ii Surveillix™ DVR/EVR/HVR Hardware Manual Manual Edition 27895AD – DECEMBER 2007 Printed in USA No part of this documentation may be reproduced in any means, electronic or mechanical, for any purpose, except as expressed in the Software License Agreement. Toshiba shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND.
iii LIMITED WARRANTY DIGITAL VIDEO RECORDER The Imaging Systems Division of Toshiba America Information Systems, Inc. (“ISD”) makes the following limited warranties. These limited warranties extend to the Original End-User (“You[r]”). Limited Two (2) Year Warranty of Labor and Parts The Imaging Systems Division of Toshiba America Information Systems warrants this product and parts against defects in material or workmanship for a period of two years from the date of original retail purchase by the end-user.
iv IMPORTANT SAFEGUARDS 1. Read Owner’s Manual – After unpacking this product, read the owner’s manual carefully, and follow all the operating and other instruction 2. Power Sources – This product should be operated only from the type of power source indicated on the label. If not sure of the type of power supply to your home or business, consult product dealer or local power company 3.
v IMPORTANT SAFEGUARDS, continued 15. Damage Requiring Service – Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the unit. If the unit has been exposed to rain or water. If the unit does not operate normally by following the operating instructions.
vi NOTES ON CLEANING Use a soft dry cloth for cleaning. For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the DVR unit. If using a chemical saturated cloth to clean the unit, follow that product’s instructions. NOTES ON MAINTENANCE This DVR unit is designed to last for long periods of time.
vii WARNING TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
viii RACK MOUNT INSTRUCTIONS Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
ix CE NOTICE This product is in conformity with the following European Directives: ELECTROMAGNETIC COMPATIBILITY DIRECTIVE, 89/336/EEC (as amended by 92/31/EECand by Article 5 of 93/68/EEC) per the provisions of: EN 55022:1994 EN 55024:1998 EN 61000-4-4:1995 EN 61000-3-2:1995 CISPR 24:1997 EN 61000-4-5:1995 EN 61000-3-3:1995 EN 61000-4-2:1995 EN 61000-4-6:1995 CISPR 22:1997 EN 61000-4-3:2002 EN 61000-4-11:1994 LOW VOLTAGE DIRECTIVE, 73/23/EEC (as amended by Article 13 of 93/68/EEC) per the prov
x
xi Table of Contents PREFACE................................................................................................................................................................................. 1 ABOUT THIS GUIDE ........................................................................................................................................................... 1 TECHNICIAN NOTES ...............................................................................................................
xii
1 PREFACE ABOUT THIS GUIDE This manual is a setup and maintenance guide that can be used for reference when setting up the DVR unit and for troubleshooting when a problem occurs. Only authorized personnel should attempt to repair this unit. Toshiba reserves the right to make changes to the DVR units represented by this manual without notice.
2
3 INTRODUCTION PRODUCT DESCRIPTION A Surveillix DVR is simply a server that performs as a High Definition Digital Recorder. By utilizing the many features of a computer, including processing power, storage capacity, graphics compression, and security features, the DVR unit is more powerful than the analog recorders of the past. The Surveillix DVR server software comes pre-configured for fast and seamless integration within your existing IT infrastructure.
4 FEATURES Toshiba’s Surveillix DVRs include the following new features: Optimized and Designed for Microsoft® Windows XP Embedded® Supports up to 16 Relay Outputs on Alarm Activation Supports up to 16 Sensor Inputs for Alarm Control Remote System Operation & Configuration Supports Multiple Simultaneous Remote Connections PAN / TILT / ZOOM Controls Simultaneous Video Search, Playback and Backup Video Indexes for Easy Searching Multiple Levels of Security Access Up to 32 Looping Outputs 1 Composite Output S
5 NOTES:
6 NOTES:
7 CONTROLS AND CONNECTIONS This chapter includes the following information: • Input / Output Connector Locations • Front Panel Controls and LEDs • Rear Panel Connectors
8 SYSTEM SPECIFICATIONS Surveillix™ state-of-the-art High Definition Digital Recorders are housed in a high performance and versatile 4U or 5U rack-mount case allowing easy storage of multiple DVRs for enterprise applications. Every Surveillix DVR unit comes equipped with the latest technology: EVR/DVR HVR Intel® Celeron D Processor Intel® Dual Core 3.
9 EVR/HVR Hard Drive Activity & Power LEDs USB Ports DVD±RW Drive On / Off Power Switch Hard Drive Array Cooling Fan Air Intake Hard Drive Array
10 REAR PANEL CONNECTORS The rear panel of the DVR unit contains the connectors used to attach cameras, sensors, and relays to the DVR.
11 EVR/HVR Control Alarm Outputs / Sensor Inputs BNC Connectors (video input) 75 Ohm Looping Termination Switch BNC Connectors (video output) Output CH 1 in CH 2 in CH 3 in CH 4 in CH 5 in CH 6 in CH 7 in CH 8 in CH 9 in CH 10 in CH 11 in CH 12 in CH 13 in CH 14 in CH 15 in CH 16 in CH 1 Out CH 2 Out CH 3 Out CH 4 Out CH 5 Out CH 6 Out CH 7 Out CH 8 Out CH 9 Out CH 10 Out CH 11 Out CH 12 Out CH 13 Out CH 14 Out CH 15 Out CH 16 Out CH 17 in CH 18 in CH 19 in CH 20 in
12 PCI Card Configuration x120 x60 PCI Configuration RCA Video Out RS-422 Interface x120R PCI Configuration RCA Video Out Audio Inputs RS-485 Interface x240 8 and 16 Channel PCI Configuration RCA Video Out S-Video Output RS-485 Interface SVGA Monitor Output Audio Inputs
13 x240 32 Channel PCI Configuration RCA Video Out S-Video Out Audio Inputs SVGA Monitor Output RS-485 Interface X480 8 and 16 Channel PCI Configuration RCA Video Out S-Video Out RS-485 Interface SVGA Monitor Output Audio Input Cable Adapter x480 32 Channel PCI Configuration RCA Video Out S-Video Out RS-485 Interface SVGA Monitor Output Audio Inputs
14 NOTES:
15 GETTING STARTED This chapter includes the following information: • Included Components • Setting up the DVR Hardware • Optional Components
16 IDENTIFYING INCLUDED COMPONENTS Surveillix™ DVRs come with a mouse, keyboard and selected software and cables. Identify the following components to make sure everything has been properly included with the new DVR unit. If any of the following items are missing, contact the dealer to arrange a replacement. DVR Unit Mouse Keyboard Repair Disc/ Software Disc Power Adapter PTZ Adapter EVR - DVR Digital Video Recorder Hardware Manual DVR8-X EVR8-X DVR16-X EVR16-X EVR32-X model no.
17 OPTIONAL COMPONENTS To fully utilize the DVR unit’s potential; several optional Surveillix components are listed below. Contact the dealer for more information. 1 Extra Video Storage Hard Drive Each DVR unit has a virtually unlimited storage potential. Add additional Video Data Hard Drives to extend the amount of Video Data the DVR system can store before overwriting older data. 2 NP-FM56USB 56K External Modem This 56K modem allows the user to connect the DVR to a standard phone line.
18 KEYBOARD SETUP To attach the keyboard to the DVR unit, plug the end of the Keyboard into the keyboard PS/2 Port located on the back of the machine. The keyboard PS/2 Port can be identified by the purple color. Refer to the Rear Panel Connectors diagram for more information. MOUSE SETUP To attach the mouse to the DVR unit, plug the end of the mouse into the mouse PS/2 Port located on the back of the machine. The mouse PS/2 Port can be identified by the green color.
19 MONITOR SETUP The DVR may have one or both of the following connections available for monitors which can be used individually or in tandem. SVGA Output To VGA Monitor. S-Video Output To TV/VCR. Attach the monitor or monitors to the rear of the DVR unit using the cable supplied by the monitor manufacturer. Refer to the monitor manual for detailed information on how to setup and use it.
20 CONNECTING A VIDEO SOURCE TO THE DVR There are different types of Video Sources that can be plugged into the DVR unit including DVD players, VHS players, and CCTV Cameras. The back of the DVR unit contains up to 16 video inputs depending on the DVR model. The connectors use the BNC standard. The inputs are highlighted below.
21 CONNECTING SENSORS TO THE DVR Each DVR unit may have up to 16 Sensor inputs. These inputs can be used with devices such as infrared devices, motion device, glass breakage alarms, door and window trips, and many more. The Sensors can be set to Normally Open or Normally Closed inside the software. There are 4 Common Grounds (-) and 16 sensor inputs (+). There is no power supplied to the ports so an external power supply must be used if power is necessary.
22 LOOPING OUTPUTS The 8 and 16 Channel DVR units may have up to 16 Looping outputs. Depending on the destination of the outputs, each output may have to be terminated. Looping outputs for a 16 Channel DVR looping are highlighted below. 32 Channel EVR units may have up to 32 looping outputs. The Video inputs are RJ-59 BNC connectors. Make sure there is a video source connected to the input and then connect a cable to the Channel Out.
23 CONNECTING A PTZ CAMERA Setting up a PTZ Camera is simple. The DVR unit comes preassembled with an internal PTZ adapter. The cabling may be run up to 4,000 ft using 22 Gauge Twisted Pair. It is important to understand how the PTZ connects to the DVR. The DVR outputs an RS-232 signal and converts in to an RS-422/485 signal which is then sent to the PTZ camera. Attaching the RS-422 Adapter (x120 and x60 models) 1. Locate the PTZ adapter cable 2. Connect the wires of the PTZ adapter to the PTZ camera.
24 HARD DRIVE ARRAY Button Lock Release Handle Handle Release Reset Button LOCK OPEN LOCK OPEN Power Buttons LOCK OPEN LOCK Temperature Alarm Light OPEN Swapping a Hard Drive 1. Press the Hard Drive Power Button to turn off power to the hard drive being removed. 2. Turn the Button Lock to the open position and push the Handle Release Button 3. Pull the Release Handle outward while removing the hard drive. Reverse steps to install.
25 NOTES:
26 NOTES:
27 APPENDIX: SPECIFICATIONS
28
29 DVR SPECIFICATIONS 8 16 CPU Intel® Celeron 3.
30 NOTES:
31 EVR SPECIFICATIONS 8 16 CPU Intel® 3.
32 NOTES:
33 HVR SPECIFICATIONS 8 16 CPU Intel® Dual Core 3.
