Introduction Connections DVR620KC Disc Management OWNER’S MANUAL Basic Setup TOSHIBA DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER Recording DVR620KC Playback Editing Function Setup The modell num number number numbe numb umber ber err and and an d serial ser se sseria erial rial al num nu n numbe numb umber mber ber are a on the back off tth this hiis unit. his unit. un unit it. t.
PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Introduction PRECAUTIONS This Class B digital apparatus complies with Canadian ICES-003. ALWAYS plug the product into an outlet that is located in such a manner that it can be easily unplugged in case the product requires service. Connections CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
PRECAUTIONS Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit.
Maintenance Servicing g Cleaning g Discs Cleaning g the Disc Lens Disc Handling g HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. “WMA” (Windows Media Audio) is a new audio codec developed by Microsoft® in the United States of America.
CONTENTS Introduction Disc Management PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .8 FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 11 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing 51 51 52 52 53 Function Setup 83 85 85 89 90 91 92 Playback LIST OF THE DEFAULT SETTINGS . . . . . . . . . . . . . . . . . GENERAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HDMI . . . . . . .
FEATURES This unit not only plays back DVD, CD and cassette tape but also offers features for you to record on DVD/cassette tape and edit them after that. The following features are offered with this unit. Recording Editing DVD mode VCR mode This unit is compatible with recording on DVD-RW/+RW which is recordable repeatedly and DVD-R/+R which accept the additional recordings until the disc becomes full but not overwritable. You can choose either one for your convenience.
Introduction FEATURES Discs for Recording, Playing back Disc type DVD-RW DVD-R DVD+RW DVD+R Format Can be formatted in VR or video mode Video Mode Automatically formatted in video mode Automatically formatted in +VR mode Automatically formatted in +VR mode 480 min (12cm) 144 min (8cm) 480 min (12cm) 144 min (8cm) 480 min (12cm) 144 min (8cm) 1X-16X Ver.2.0/ 2.1 1×-4× 1×-16× Playable on DVD+RW compatible players. Finalization recommended.
FEATURES Discs for playing back Disc Type DVD-VIDEO CD-DA CD-RW CD-R Logo Icon Files for playing back Type of title Recording/Playing back MP3 WMA JPEG VCR CD-RW/-R CD-RW/-R CD-RW/-R Cassette Tape Icon Media is a trademark of DVD Format/Logo Licensing Corporation. * This unit cannot play back the disc contents protected by Windows Media Digital Rights Management (DRM). Unplayable Discs The following discs will not play back on this unit.
Introduction FUNCTIONAL OVERVIEW Front Panel 1 2 3* 4 DUBBING 6 7 DVD SELECT L2 VIDEO 22 21 20 19 18 17 16 15 14 R 13 12 11 10 9* 8 DV IN Disc Management Recording Playback 14. TRACKING / buttons (VCR) • Press to adjust the tracking during playback or in slow motion of the cassette tape. • While playback is in still mode, you can stabilize the picture. 15. Display (“Off ” in standby) • Refer to “FRONT PANEL DISPLAY GUIDE” on page 18. 16.
FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Install 2 AA (1.5 V) batteries matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
Disc Management Recording Playback Editing Function Setup VCR Function Note Others • If you turn off this unit, [OPEN/CLOSE A] on the remote control is not available. Be sure to use [A OPEN/CLOSE] or [EJECT/STOP A/C] on the unit. EN E9PKCCD_DVR620KC_EN_book.indb 13 Basic Setup 18. TRACKING / buttons (VCR) • Press to adjust the tracking during playback or in slow motion of the cassette tape. • While playback is in still mode, you can stabilize the picture. 19. SAT.
THE VCR / DVD RECORDER SWITCHING Because this product is a combination of a VCR and a DVD recorder, you must select first which component you want to operate with [VCR/DVD]. DVD mode VCR mode Press [DVD] on the remote control. (Verify that the DVD indicator is lit.) Press [VCR] on the remote control. (Verify that the VCR indicator is lit.) VCR TRACKING DUBBING OPEN/ CLOSE INPUT SELECT .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.
The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference. The on-screen display changes in the following order as you press [DISPLAY].
GUIDE TO ON-SCREEN DISPLAYS AND MENUS VCR Information VCR mode MP3/WMA Tag Information • First, track name will be displayed. 1 12:00AM 2 Track Name • If you press [DISPLAY] one more time, artist name will be displayed. Artist Name 1. 2. 3. 4. 5. SP 0:00:00 HIFI 3 4 5 * This is an example screen only for explanation. Indicates current video status. Indicates the current time. Indicates a recording or playing back mode. Indicates a tape counter. Audio status of the current cassette tape.
Main Menu Setup General Setting Timer Programming Title List DVD Menu DISC Playback Mode Basic Setup 1 2 3 4 5 1. General Setting: To go to general setting menu. 2. Timer Programming: To program a timer recording. 3. Title List: To call up the title list. 4. DVD Menu: To set up the DVD setting. 5. DISC Playback Mode: To set up the disc playback setting. • “DISC Playback Mode” is available only when an audio CD, a CD-RW/-R with MP3 / WMA / JPEG files is inserted into the unit.
FRONT PANEL DISPLAY GUIDE 2 1 PM BS CS DR CD VCR DB HDD DVD 3 4 1. PM : Appears when this unit is in DVD output mode and a disc is in the unit. : Appears during duplication process. : Appears in the afternoon with the clock display. 2. Title / track and chapter mark : Appears when indicating a title / track number. : Appears when this unit is in VCR output mode and a cassette tape is in the unit. : Appears during duplication process. : Appears when indicating a chapter number. 3.
Introduction CONNECTIONS 1) Disconnect the AC power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) After making all the connections, connect the AC power cords of the devices. Connections • Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, DVD playback pictures may be distorted due to the copy protection system.
CONNECTIONS Connecting to a TV Using an HDMI Compatible Port HDMI IN HDMI cable HDMI OUT rear of this unit HDMI OUT DIGITAL AUDIO OUT AUDIO OUT DVD/VCR S-VIDEO COMPONENT VIDEO OUT S-VIDEO IN --- AUDIO --- OUT (L1) Y L OUT PB /CB COAXIAL L L R R IN ---VIDEO --- OUT R T I OU HDM IN T I OU HDM PR /CR T I OU HDM Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched.
Introduction CONNECTIONS Connecting to a TV Using Component Video Input Jacks COMPONENT VIDEO OUT COMPONENT VIDEO IN (Green) PB /CB AUDIO OUT PR /CR RCA component video cable (Blue) Connections (Green) Y Y (Blue) PB /CB (Red) (Red) PR /CR VIDEO IN Basic Setup L AUDIO IN RCA audio cable L R R Disc Management rear of this unit HDMI OUT DIGITAL AUDIO OUT AUDIO OUT DVD/VCR S-VIDEO COMPONENT VIDEO OUT S-VIDEO IN --- AUDIO --- OUT (L1) L L R R Y L PB /CB OUT IN COAXIAL IN
CONNECTIONS Connecting to a TV Using Audio / Video Input Jacks IN --- AUDIO --- OUT (L1) AUDIO IN L R L RCA audio cable L R R IN ---VIDEO --- OUT VIDEO IN RCA video cable rear of this unit HDMI OUT DIGITAL AUDIO OUT AUDIO OUT DVD/VCR S-VIDEO COMPONENT VIDEO OUT S-VIDEO Y L OUT PB /CB IN COAXIAL IN --- AUDIO --- OUT (L1) L L R R IN ---VIDEO --- OUT PR /CR R Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 • RCA video cable x 1 Connecting to a T
Introduction CONNECTIONS Digital Audio Connection Coaxial Cable Connection rear of this unit digital audio coaxial input jack COAXIAL HDMI OUT digital audio coaxial cable DIGITAL AUDIO OUT AUDIO OUT DVD/VCR S-VIDEO COMPONENT VIDEO OUT S-VIDEO IN --- AUDIO --- OUT (L1) Y COAXIAL L PB /CB OUT IN COAXIAL L L R R IN ---VIDEO --- OUT PR /CR R Connections Dolby Digital decoder Basic Setup HDMI Audio Connection AV receiver / amplifier with an HDMI input jack HDMI IN HDMI OUT Disc Managem
CONNECTIONS Note • The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters. • By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the original sound as truthfully as possible.
Introduction INITIAL SETTING When you turn on this unit for the first time, you need to follow these steps after you have completed all the connections. HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK TIMER PROG. SPACE SETUP DISPLAY DISC MENU AUDIO TOP MENU 1 2 3 CLEAR RETURN INSTANT 1.3x/0.8x SKIP PLAY TIME SLIP Press the button on the TV’s remote control that accesses the external input channel.
SETTING THE CLOCK Set the clock before you try the timer programming. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK TIMER PROG. SPACE SETUP DISPLAY DISC MENU 1 2 3 TOP MENU ENTER RETURN 4 PLAY FWD SKIP STOP SKIP PAUSE VCR DVD DUBBING REC MODE REC REPEAT TIMER SET SEARCH ZOOM “Clock” menu will appear. Use [K / L] to select calendar or time, then press [ENTER].
Introduction SETTINGS FOR THE VIDEO INPUT You must let the unit know which video input jack you are using before making a recording. HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK TIMER PROG. SPACE SETUP DISPLAY TOP MENU ENTER CLEAR RETURN REV PLAY Use [K / L] to select “Video”, then press [ENTER]. Use [K / L] to select “Select Video”, then press [ENTER]. Use [K / L] to select the input jack type to connect, then press [ENTER].
FORMATTING A DISC Choosing the Recording Format of a Brand-New DVD-RW When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the desired mode. You can also manually format a DVD-RW once it has been used.
Introduction FORMATTING A DISC Reformatting a Disc Manually Insert a recordable disc. INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK SPACE Use [K / L] to select “DVD Menu”, then press [ENTER]. Setup General Setting Disc Management TIMER PROG. 1 2 Press [SETUP].
SETTING A DISC TO PROTECT To prevent accidental recording, editing or erasing the titles, you can protect them from “DVD Menu” menu. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK TIMER PROG. SPACE SETUP DISPLAY DISC MENU 1 2 3 Press [SETUP]. Use [K / L] to select “DVD Menu”, then press [ENTER]. Use [K / L] to select “Disc Protect OFF ON”, then press [ENTER]. e.g.
Auto Finalizing HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK TIMER PROG. SPACE SETUP DISPLAY AUDIO TOP MENU DISC MENU Use [K / L] to select “Recording”, then press [ENTER]. “Recording” menu will appear. Use [K / L] to select “Auto Finalize”, then press [ENTER]. Disc Management INPUT SELECT “General Setting” menu will appear. Basic Setup OPEN/ CLOSE 1 2 3 4 Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER].
PLAYING THE DISCS IN OTHER DVD PLAYERS Finalizing a Disc You will need to finalize discs to play back on other DVD players. Finalizing may take several minutes up to an hour. Since the process of the finalization fills empty space of the disc, a shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK 1 2 3 4 Press [SETUP].
Note ON Do you want to cancel ? Yes No Finalizing 5% Recording • To undo the finalization of the DVD+RW, make an additional recording onto the disc. • DO NOT power off during finalizing. This may result in a malfunction. • For DVD+RW, if you have added or deleted chapters, or made chapters hidden, you must finalize the disc before being able to see those effects on other units. To play back discs other than DVD+RW on other DVD players, you will need to finalize.
INFORMATION ON DVD RECORDING Recording Mode Restrictions on Recording You can select a recording mode among 5 options, and the recording time will depend on the recording mode you select as follows. Recording mode XP SP LP SLP Recording time 12cm 8cm Video/ Sound Quality 60 min 18 min 120 min 36 min 240 min 72 min 360 min 108 min 480 min 144 min • The recording times listed above are estimates and are for reference purposes only. Actual recording times may vary.
Make Recording Compatible 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2) Use [K / L] to select “Recording”, then press [ENTER]. “Recording” menu will appear. 3) Use [K / L] to select “Auto Chapter”, then press [ENTER]. 4) Use [K / L] to select a desired time option, then press [ENTER].
SETTINGS FOR A RECORDING Recording Audio Select (XP) You can enjoy high quality sound recording. This function works only when the recording mode is set at XP. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2) Use [K / L] to select “Recording”, then press [ENTER]. “Recording” menu will appear. 3) Use [K / L] to select “Recording Audio Select (XP)”, then press [ENTER]. 4) Use [K / L] to select “PCM” or “Dolby Digital”, then press [ENTER].
Follow the steps to record TV programs. HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. TIMER PROG. SPACE SETUP Press [DVD]. Basic Setup INPUT SELECT Turn on the TV and be sure to select the input to which the unit is connected. DISPLAY Align the disc to the disc tray guide.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Press [REC I] to start recording. 6 “I” will be displayed for 5 seconds. I SP 7 Press [STOP C] to stop recording. The recorded title will be included in the title list. (Refer to “Guide to a Title List” on page 68.) e.g.) DVD+R/DVD-RW/-R 1:53 Press [PAUSE F] to pause recording. Press [PAUSE F] or [REC I] again to restart recording. To set one-touch timer recording (OTR)... Wait for a moment. 90% This operation may take awhile to be completed.
Introduction TIMER RECORDING Guide to Timer Programming Display DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK TIMER PROG. SPACE SETUP DISPLAY TOP MENU ENTER JAN/ 6/11 1:00 AM L1 SP SP (1:00) Date JAN/06 THU JAN/06 10:00AM Start End 1:00AM 2:00AM New Program L1/L2 L1 1/1 4 5 1. Title of a Timer Program (Contains date, time, external input, recording mode of the program) 2. Current date and time 3. Recording mode and length of the recording 4. Timer program list 5.
TIMER RECORDING 3 Use [K / L] to enter the date, then press [B]. Date JAN/06 L1/L2 L1 Start --:-REC To DVD Refer to “Recording Mode” on page 34 for DVD or “Recording” on page 93 for VCR. • You can check the remaining recordable space of the disc when you select the recording mode. End --:-Mode SP SP Date JAN/06 L1/L2 L1 2 : 00 JAN/01 When pressing [L] at the current date, the date will change as follows. Daily MON-SAT MON-FRI SAT e.g.
To stop the timer recording in progress 1) Press [STOP C] on the remote control. Confirmation message will appear. If the timer program did not complete correctly, the error number appears in the timer programming list. Introduction TIMER RECORDING Timer Programming Connections THU JAN/06 10:00AM 2) Select “Yes”, then press [ENTER]. E41 Date JAN/06 • To stop the timer recording immediately, press [STOP C] on the unit.
TIMER RECORDING Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not inserted or if a inserted disc is not recordable (finalized DVD-RW/-R, finalized DVD+RW, a fully recorded disc, etc.), “DVD” on the front panel display flashes and timer recording cannot be performed. In some cases, will appear momentarily around the start point as the unit attempts to record.
Select the desired recording mode. (Refer to “Recording Mode” on page 34 for DVD or “Recording” on page 93 for VCR) In a second, the unit will be turned into the standby mode automatically as it goes into the satellite link standby mode. Basic Setup To cancel the satellite link function while in the satellite link standby mode: Press [SAT. LINK] or [TIMER SET]. To cancel the satellite link function while the satellite link recording is in progress: Press [STOP C].
SETTINGS FOR AN EXTERNAL DEVICE Connection to an External Device Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front). Use S-video or the RCA audio/video cables for this connection. When connecting a DVC (digital video camcorder), it is recommended to connect the DVC with the front DV IN jack with a commercially available mini DV/Firewire cable.
Introduction SETTINGS FOR AN EXTERNAL DEVICE Recording from an External Device INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK DISPLAY AUDIO ENTER CLEAR RETURN INSTANT 1.3x/0.8x SKIP PLAY TIME SLIP REV PLAY FWD SKIP STOP SKIP VCR DVD DUBBING REC MODE REC REPEAT TIMER SET SEARCH 7 5 VCR RACKING DUBBING 5 Press [I REC] on the unit to start recording. Start playback on the external device to record from.
DV DUBBING Guide to DV and On-Screen Display This function helps you to easily dub the contents of the DVC (digital video camcorder) to this unit. You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is compliance with the IEEE1394 standards.
Introduction DV DUBBING DVC to DVD Dubbing INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK SETUP DISPLAY AUDIO Press [DISPLAY]. With “Control” highlighted, press [ENTER] to display the available devices to control with the remote control of this unit. Use [K / L] to select “DVC”, then press [ENTER]. 1/ 1 1/ 1 -RW Control DV Audio Start Rec TOP MENU DISC MENU Disc Management TIMER PROG.
DV DUBBING DVC to VCR Dubbing Before recording from DVC, refer to page 44 for connection instructions. This DVC to VCR dubbing is available only for audio / video out connection and not available for S-video, component or HDMI connection. (Refer to “Information on VCR Functions” on page 93). DISC MENU TOP MENU ENTER CLEAR RETURN INSTANT 1.3x/0.8x SKIP PLAY TIME SLIP REV PLAY FWD SKIP STOP SKIP PAUSE VCR DVD DUBBING REC MODE REC 1 2 3 4 Repeat the steps 1 and 2 on page 47.
Make sure: • Insert a recordable disc and a cassette tape with an erase-protection tab. Note for recording to a disc: • Make sure that the disc is recordable. Refer to page 9. “General Setting” menu will appear. Use [K / L] to select “Recording”, then press [ENTER]. “Recording” menu will appear. Basic Setup Note for recording to a cassette tape: • The cassette tape's erase-protection tab is intact. • The remaining time of the cassette tape is long enough.
DVD/VCR DUBBING VCR to DVD Use [K / L] to select “VCR then press [ENTER]. 4 DVD to VCR DVD”, Dubbing Mode VCR DVD 5 6 Press [PLAY B]. Then press [PAUSE F] at the point you wish to start recording. • Since it takes about a few seconds before the actual dubbing begins, please allow extra 5 seconds when selecting the starting point. Press [DVD], then press [REC MODE] repeatedly to select the desired recording mode. Press [DUBBING]. VCR to DVD duplication will start.
Introduction INFORMATION ON PLAYBACK Structure of Disc Contents DVD Title: Title 1 Titl Titl 2 Title Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Chapter: Audio CD Track 1 Track 2 Track 4 Track 5 Each title, chapter, or track, folder or file is assigned a number, which is called “title number”, “chapter number”, “track number”, “folder number” or “file number” respectively. Some discs may not have these numbers.
BASIC PLAYBACK Direct Playback OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK Press [DVD]. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. TIMER PROG. SPACE SETUP 1 2 Press [I/y y ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected. DISPLAY DISC MENU AUDIO Align the disc to the disc tray guide. TOP MENU ENTER CLEAR RETURN INSTANT 1.3x/0.
Introduction BASIC PLAYBACK Playback from the Title List HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK Align the disc to the disc tray guide. TIMER PROG. SPACE SETUP Basic Setup INPUT SELECT DISPLAY TOP MENU ENTER CLEAR RETURN REV PLAY FWD SKIP STOP SKIP VCR DVD DUBBING REC MODE REC REPEAT TIMER SET SEARCH ZOOM 5 Use [K / L / { / B] to select a desired title, then press [ENTER]. Press [TOP MENU]. Title list will appear.
BASIC PLAYBACK Playing Back an Audio CD and a CD-RW/-R with MP3/WMA/JPEG Files 1 2 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK SETUP DISPLAY DISC MENU AUDIO TOP MENU ENTER RETURN CLEAR INSTANT 1.3x/0.8x SKIP PLAY TIME SLIP Press [OPEN/CLOSE A] to close the disc tray. It may take awhile to load the disc completely. When an audio CD is inserted, track list will appear.
Introduction BASIC PLAYBACK Using the Title/Disc Menu Note • You can select a numbered menu with [the Number buttons] also. • Menus vary among discs. Refer to the information accompanying the disc for details. • [DISC MENU] or [TOP MENU] will not always be effective for all DVDs. Recording Pause Press [DVD] first. 1) During playback, press [PAUSE F]. Playback will be paused and sound will be muted. Playback • The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck.
SPECIAL PLAYBACK Skipping TV Commercials During Playback Resume Playback You can play back from where you stopped playing back the disc last. Press [DVD] first. 1) During playback, press [STOP C]. The resume message will appear. Resume ON 2) Press [PLAY B]. In a few seconds, playbackk will resume from the point at which it stopped last. You can resume playbackk at the same point even if you turn the unit into the standby mode.
Rapid Playback B x1.3: Press [1.3X / 0.8X PLAY] thrice to play back in normal speed. No effects. 2) Press [PLAY B] to return to the normal playback. Note 1/4x REV FWD 1/8x REV FWD 1/16x REV FWD pause REV FWD 1/16x REV FWD 1/8x REV 1/3x 2) Press [PLAY B] to return to the normal playback. Note • Forward/reverse speed will be indicated with icons as follows. forward (approx. speed) 1/16x: 1/8x: 1/3x: reverse (approx.
SPECIAL PLAYBACK Marker Setting Zoom Press [DVD] first. 1) During playback, press [DISPLAY] or [ZOOM]. • If you press [ZOOM], skip to step 3. 2) Use [{ { / B] to select menu. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 This feature allows you to assign a specific point on a disc to be called back later. Press [DVD] first. 1) During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. 2) Use [{ { / B] to select e.g.
Introduction SPECIAL PLAYBACK Chasing Playback during Recording Screen for the current playback: 6/ 6 1/ 1 0:01:00 / 1:23:45 -RW VR ORG 1:01 2) Press [STOP C] once to stop playback. The resume message will appear. Screen for the current recording: 1 1:23:45 -RW VR ORG L1 (Rear) LP 1:01 • Playback image may freeze momentarily using this function. However, this does not affect the recording. • The 2x fast forward playback is not available. • [REC I] is not available during this function.
SPECIAL PLAYBACK Simultaneous Playback and Recording You can also play back a recorded title during current recording or the timer recording on the same disc. C] once to stop playback. The resume message will appear. Screen for the current recording: 1) During recording, press [DISPLAY]. Screen for the current recording: 3 1 1:30:25 -RW 3 1 VR ORG L1 (Rear) 1:23:45 -RW VR ORG L1 (Rear) Resume ON 2) Select { / B], then press [ENTER]. The title number next to will be highlighted.
Title/Chapter Search Introduction SEARCH Track Search Press [DVD] first. 1) During playback, press [SKIP i] to skip the current track/file and move to the next. The track/file will move forward one at a time. To go back to the beginning of the current track/file, press [SKIP j ]. (For JPEG files, press it once to go to the previous file.) Press it twice in quick successions to go to the previous track/file. The track/file will move backward one at a time.
SEARCH Time Search Press [DVD] first. 1) During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. 2) Use [{ { / B] to select e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) audio CD 1/ 5 0:00:15 / 0:05:00 CD The number next to will be highlighted. To move to the number next to When time search is not available, counter are not displayed. , press [B].
Note Repeat Playback 1/ 5 to display the selection 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) DVD-video e.g.) audio CD OFF Track All A-B OFF Track All Group 2) Use [K / L] to select “DISC Playback Mode”, then press [ENTER]. “DISC Playback Mode” menu will appear. For MP3/WMA, use [K / L] to select “Music”, then press [ENTER]. For JPEG, use [K / L] to select “Photo”, then press [ENTER]. 3) Use [K / L] to select “Random Play”, then press [ENTER]. Random playback will start. e.g.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW Program Playback Slide Show You can program the disc to play back in your desired order. Press [DVD] first. 1) Press [SETUP] in stop mode. 2) Use [K / L] to select “DISC Playback Mode”, then press [ENTER]. “DISC Playback Mode” menu will appear. 3) Use [K / L] to select “Program Play”, then press [ENTER]. 4) Use [K / L] to select a desired track, then press [ENTER] or [B]. You can select the display time between 5 seconds and 10 seconds. Press [DVD] first.
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack 1/ 5 to display the selection 1/ 5 0:01:00 / 1:23:45 DVD Video 1/ 5 0:01:00 / 1:23:45 2) Use [{ { / B] to select menu. to display the selection 3) Use [K / L] to select a desired audio soundtrack or audio channel, then press [ENTER]. For DVD-video or VR mode DVD-RW • Audio soundtrack will switch. e.g.
SELECTING THE FORMAT OF AUDIO AND VIDEO Switching Virtual Surround System You can enjoy stereophonic virtual space through your existing 2 channel stereo system. Press [DVD] first. 1) During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. Switching Camera Angles angles. Angle information should be on the disc case if the disc contains multi-angle scenes. Press [DVD] first. 1) During playback, press [DISPLAY].
Reducing Block Noise Introduction SELECTING THE FORMAT OF AUDIO AND VIDEO Adjusting Black Level You can adjust the black level to control the brightness of the picture in order to get a better picture. 2) Use [{ { / B] to select menu. e.g.) DVD-video 1) During playback, press [DISPLAY]. 1/ 5 to display the selection 1/ 5 0:01:00 / 1:23:45 DVD Video 2) Use [{ { / B] to select menu. e.g.
INFORMATION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TOP MENU]. 4 ORG 5 6 Title List JAN/ 6/11 1:00AM L1 LP 12:00AM (2:00:00) JAN/ 6/11 L1 LP 1 2 3 4 5 6 1/2 3 2 1 ORG 3 Edit 2 Scene Delete Edit Title Name Chapter Mark Protect JAN/ 6/11 11:00PM L1 LP 0 : 00 : 59 11 10 9 8 7 1.
Introduction DELETING TITLES Notes for deleting titles After the disc is fully recorded: DVD-RW/DVD+RW TITLE 2 TITLE 2 TITLE 2 TITLE 2 TITLE 2 TITLE 3 TITLE 2 You cannot record a new title. Disc Management TITLE 3 Deleted titles cannot create the space. TITLE 1 TITLE 3 Delete! TITLE 3 You can record a new title. Basic Setup Delete! TITLE 1 TITLE 1 You can record a new title.
DELETING TITLES You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. Be sure to read “Notes for deleting titles” on page 69 before you delete the title. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF 1 2 Press [DVD]. In stop mode, press [TOP MENU]. Title list, original or playlist will appear. • For VR mode DVD-RW, press [DISC MENU] to switch between “Original” and “Playlist”.
Introduction CREATING/DELETING PLAYLIST Adding Titles to a Playlist Playlist HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK SETUP 4 Use [K / L] to select “Yes”, then press [ENTER]. TIMER PROG. SPACE DISPLAY DISC MENU AUDIO TOP MENU Recording Create a Playlist ? The title is added to playlist. RETURN INSTANT 1.3x/0.8x SKIP PLAY TIME SLIP PLAY FWD SKIP STOP SKIP PAUSE VCR DVD DUBBING REC MODE REC 5 Press [RETURN] or [STOP C] to exit.
CREATING/DELETING PLAYLIST Erasing All Playlist Playlist OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK DISPLAY DISC MENU Main menu will appear. Use [K / L] to select “DVD Menu”, then press [ENTER]. Use [K / L] to select “Delete All Playlists”, then press [ENTER]. DVD Menu Format Finalize Disc Protect OFF ON Delete All Playlists TIMER PROG. SPACE SETUP 1 2 3 Press [DVD]. Press [SETUP]. AUDIO TOP MENU ENTER CLEAR RETURN INSTANT 1.3x/0.
Introduction EDITING DISCS Putting Names on Titles SETUP DISPLAY DISC MENU AUDIO 4 Use [K / L] to select “Edit Title Name”, then press [ENTER]. ORG Connections You can put a name on the title and change it from this menu. Edit TOP MENU 1 Scene Delete Edit Title Name Chapter Mark Protect Basic Setup ENTER CLEAR RETURN JAN/ 6/11 1:00AM L1 LP 1 : 25 : 47 INSTANT 1.3x/0.
EDITING DISCS Guide to Edit Title Name 1) Use [K / L] to select a desired character set, then press [ENTER]. 2) Follow the list below, use [the Number buttons] repeatedly until the desired letter appears. OPEN/ CLOSE INPUT SELECT Select HDMI Press .@/: ABC DEF GHI JKL MNO PQRS TUV abc 123 @!? 0 (*1) (*1) 1 ! ”# $ % & ’( ) *+,-.
Introduction EDITING DISCS Setting Chapter Marks INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK SETUP DISPLAY DISC MENU Submenu will appear. Use [SKIP H / G], [REV E], [FWD D], [PLAY B] and [PAUSE F] to find the point where you will create a new chapter mark. Or, use [SKIP H / G] to find a chapter mark that you wish to delete. AUDIO TOP MENU 4 e.g.) VR mode DVD-RW original ORG ENTER 1 RETURN Chapter INSTANT 1.3x/0.
EDITING DISCS Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. OPEN/ CLOSE INPUT SELECT 2 Use [K / L/ s / B] to select a desired title, then press [ENTER]. +VR Title List JAN/ 6/11 1:00AM 1:00AM (2:00:00) L1 LP JAN/ 6/11 L1 LP 1 2 3 4 5 6 HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK 1/2 TIMER PROG. SPACE SETUP DISPLAY DISC MENU 3 Use [K / L] to select “Edit”, then press [ENTER].
Introduction EDITING DISCS Deleting a Part of a Title INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO Use [K / L] to select “Scene Delete”, then press [ENTER]. e.g.) VR mode DVD-RW playlist. PL Edit TRACKING 1 PQRS TUV SAT.LINK WXYZ Disc Management TIMER PROG.
EDITING DISCS Use [SKIP H / G], [REV E], [FWD D], [PLAY B] and [PAUSE F] to find the start point, then press [ENTER]. 3 4 Use [K / L] to select “Delete” then press [ENTER]. PL Edit - Scene Delete 1 PL Edit - Scene Delete 1 Start End Preview Delete Start End Preview Delete JAN/ 6/11 1:00AM L1 LP 1 : 47 : 00 JAN/ 6/11 1:00AM L1 LP 1 : 25 : 47 Then use [SKIP H / G], [REV E], [FWD D], [PLAY B] and [PAUSE F] again to move to the end point, and press [ENTER].
Introduction EDITING DISCS Dividing a Title Playlist HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK TIMER PROG. SPACE AUDIO TOP MENU ENTER RETURN Use [K / L] to select “Yes”, then press [ENTER]. e.g.) VR mode DVD-RW playlist PL INSTANT 1.3x/0.8x SKIP PLAY TIME SLIP Edit - Title Dividing 1 REV PLAY FWD SKIP STOP SKIP VCR DVD DUBBING REC MODE REC Yes No Playback PAUSE Recording CLEAR Use [K / L] to select “Title Dividing”, then press [ENTER].
EDITING DISCS Combining Titles 1 2 Playlist OPEN/ CLOSE INPUT SELECT HDMI Follow the steps 1 to 3 in “Dividing a Title” on page 79 to display “Edit” menu. Use [K / L] to select “Title Combining”, then press [ENTER]. PL Edit 1 .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK Scene Delete Edit Title Name Chapter Mark Title Dividing Title Combining JAN/ 6/11 1:00AM L1 LP 1 : 25 : 47 TIMER PROG. SPACE SETUP DISPLAY DISC MENU Title combining setting window will appear.
Introduction EDITING DISCS Setting or Releasing the Title Protection Original 1 2 Use [K / L] to select “Protect”, then press [ENTER]. ORG Edit INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK Basic Setup 1 OPEN/ CLOSE Connections To prevent the accidental editing, or erasing of the titles, you can protect them in “Edit” menu. You can cancel the title protection feature after it is applied.
EDITING DISCS Setting or Clearing All Chapter Marks at Once For titles in video mode DVD-RW, you can set or edit chapter at every time interval. You can clear the chapter mark too. You can specify the interval of chapter marks for titles last more than 5 minutes. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK 1 2 Follow the steps 1 to 3 in “Putting Names on Titles” on page 73 to display “Edit” menu.
Introduction LIST OF THE DEFAULT SETTINGS The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Playback Items (highlight is the default) OFF Audio Out Dynamic Range → page 87 Control PCM ON Disc Menu Language → page 88 OSD Language → page 89 General Setting g Select Video - L1 (Rear) → page 27 4:3 Letter Box 4:3 Pan & Scan 16:9 Wide Video In S-Video In Set the language for audio. Set the language for subtitles.
LIST OF THE DEFAULT SETTINGS Setup Items (highlight is the default) Recording Auto Chapter → page 35 General Setting g Recording Audio Select (XP) → page 36 Auto Disc Full Finalize → page 31 End of Timer Rec Aspect Ratio (Video mode) → page 36 Clock HDMI Dubbing Mode → pages 49 - 50 Make Recording Compatible → page 35 Clock Setting → page 26 Format → page 91 HDMI Audio → page 91 RGB Range → page 91 Reset All → page 92 Contents OFF 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes PCM Dolbyy Di
Introduction GENERAL SETTING Playback Press [STOP C] if you are playing back a disc. HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK 3 Use [K / L] to select a desired item, then press [ENTER]. Use [K / L] to select “Playback”, then press [ENTER]. General Setting DISPLAY DISC MENU AUDIO Disc Management Playback Display Video Recording Clock HDMI Reset All TIMER PROG.
GENERAL SETTING 1 Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. Use [K / L] to select the desired level, then press [ENTER]. A A password has not been set yet. Use [K / L] to select “Yes”, then press [ENTER].
2 C Audio Out Use [K / L] to select a setting, then press [ENTER]. Dolby Digital Use [K / L] to select a desired item, then press [ENTER]. PCM Stream Audio Out A B C D Dynamic Range Control (Default : ON) Set to “ON” to compress the range between soft and loud sounds. Use [K / L] to select a setting, then press [ENTER]. D Settings for DTS (Default : ON) Select a setting using [K / L], then press [ENTER]. ON OFF Disc Management Dynamic Range Control Your setting will be activated.
GENERAL SETTING 3 Disc Menu Language (Default : English) Set the language for disc menu. Use [K / L] to select a language, then press [ENTER]. 6 Angle Icon (Default : ON) Set to “ON” to show the angle icon during the playback. Use [K / L] to select a setting, then press [ENTER]. Disc Menu Language Angle Icon English French Spanish Other ON OFF Your setting will be activated. 4 7 Audio Language (Default : Original) Set the audio language. Use [K / L] to select a language, then press [ENTER].
Introduction GENERAL SETTING Display 1 INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK OSD Language DISPLAY DISC MENU AUDIO TOP MENU 2 Screen Saver (Default : 10 minutes) Set the time to activate the screen saver function on the TV screen. Use [K / L] to select a setting, then press [ENTER]. Disc Management Screen Saver OFF 1 minute 5 minutes 10 minutes 15 minutes ENTER CLEAR RETURN INSTANT 1.3x/0.
GENERAL SETTING Video 1 .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK TIMER PROG. SPACE Progressive (Default : OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”. 1) Use [K / L] to select “ON“, then press [ENTER].
Introduction GENERAL SETTING HDMI HDMI .@/: ABC DEF GHI JKL MNO TRACKING PQRS TUV WXYZ SAT.LINK TIMER PROG. SPACE SETUP DISPLAY TOP MENU ENTER CLEAR 4 When you finish with the setting, press [SETUP] to exit. 1 1 Format 2 HDMI Audio 3 RGB Range Format (Default : RGB) You can select the color space for HDMI output. Set the appropriate color space for your display device. Use [K / L] to select a setting, then press [ENTER].
GENERAL SETTING Reset All Reset the setting to default. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV TRACKING 3 Select “Yes” using [K / L] , then press [ENTER]. SAT.LINK WXYZ TIMER PROG. SPACE SETUP 1 2 Press [SETUP] in stop mode and use [K / L] to select “General Setting”, then press [ENTER]. DISPLAY DISC MENU Use [K / L] to select “Reset All”, then press [ENTER].
Information on VCR Functions Press [VCR] first. Before recording, make sure: • The appropriate external input position (L1/L2) to which your external tuner is connected is selected by pressing [INPUT SELECT ]. • There is a cassette tape with an erase-protection tab in the unit. • The desired recording speed is selected in SP (standard playback) or SLP (super long playback) mode by pressing [REC MODE] repeatedly.
VCR FUNCTIONS One-touch Timer Recording (OTR) Index Search This feature allows you to set the recording length simply by pressing [REC I] on the remote control. An index mark will be assigned at the beginning of each recording you make. You may skip to a specific marked point by following the steps below. Press [VCR] first. 1) During normal recording, press [REC I] to begin the one-touch timer recording. You can select a fixed recording time by pressing [REC I] repeatedly. Press [VCR] first.
Time Search Press [VCR] first. 1) Press [SEARCH] repeatedly so that “TIME SEARCH” menu appears.
TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom The power does not turn on. Remedy • Check that the AC power cord is connected securely. • Check the breaker (in case of power failure). • Press [TIMER SET] to cancel the timer standby mode. There is no picture. • Re-connect the connecting cords securely.
Symptom DV signal cannot be input. Picture noise appears. Playback picture from the external devices connected to this unit is distorted. There is no sound. EN E9PKCCD_DVR620KC_EN_book.indb 97 Others Discs recorded on this unit cannot be played back on other DVD players. VCR Function Playback image freezes for a second. Function Setup D Sound is noisy. V The disc does not play back. D Editing • If the setup menu appears on the TV screen, press [RETURN] to exit.
TROUBLESHOOTING Symptom The disc does not start playback from the beginning. The unit starts playing back the disc automatically. Some functions such as stop, search, or slow-motion playback cannot be performed. The language for the sound track cannot be changed. The subtitle language cannot be changed or turned off. The angles cannot be changed. D V D Recording does not stop immediately after you press [STOP C]. The disc tray does not open when you press [OPEN/CLOSE A].
Error message • You are trying to record onto the protected disc which is set in “DVD Menu” menu. • You are trying to record onto the disc which has no space for recording. • Release the disc protect setting in “DVD Menu” menu (page 30). • Insert the recordable disc with enough recording space. • You are trying to record onto the DVD-RW/-R on which the number of recording titles comes up to the maximum (99).
LANGUAGE CODE Language Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Code 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5
PCM (Pulse Code Modulation) An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. The most common system of encoding digital audio, found on CD and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio.
SPECIFICATIONS • This model complies with the below specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future.
/LPLWHG &DQDGLDQ :DUUDQW\ )RU 7RVKLED %UDQG 'LJLWDO $XGLR 9LGHR 3URGXFWV Editing Function Setup VCR Function <28 0867 5($' $1' )2//2: $// 6(7 83 $1' 86$*( ,16758&7,216 ,1 7+( $33/,&$%/( 86(5 *8,'(6 $1' 25 0$18$/6 ,) <28 )$,/ 72 '2 62 7+,6 '$9 352'8&7 0$< 127 )81&7,21 3523(5/< $1' <28 0$< 68))(5 '$0$*( 7+,6 :$55$17< :,// 127 &29(5 $1< 6(59,&( 7+$7 ,6 5(48,5(' ,1 3$57 25 ,1 :+2/( $6 $ 5(68/7 2) $1< )$,/85( 72 )2//2: 7+( 6(7 83 $1' 86$*( ,16758&7,216 7+,6 :$55$17< '2(6 127 $33/< $1' 6+$// %(
LIMITED WARRANTY ,) 7+( '$9 352'8&7 )$,/6 72 :25. $6 :$55$17(' $%29( <285 62/( $1' (;&/86,9( 5(0('< 6+$// %( 5(3$,5 25 5(3/$&(0(17 2) 7+( '()(&7,9( 3$57 ,1 12 (9(17 :,// 7&/ 726+,%$ &25325$7,21 7+(,5 $)),/,$7(6 $'5V 25 $63V 7+( 5(/$7(' 3$57,(6 %( /,$%/( 72 <28 25 $1< 7+,5' 3$57< )25 $1< '$0$*(6 021(< 5(,0%856(0(17 &2676 25 (;3(16(6 7+,6 /,0,7$7,21 $33/,(6 72 '$0$*(6 021(< 5(,0%856(0(17 &2676 25 (;3(16(6 2) $1< .
Connections Basic Setup Disc Management Recording Playback Editing Function Setup VCR Function Others 2011/09/01 9:30:29 E9PKCCD_DVR620KC_EN_book.
Introduction Connections DVR620KC Disc Management OWNER’S MANUAL Basic Setup TOSHIBA DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER Recording DVR620KC Playback Editing Function Setup The modell num number number numbe numb umber ber err and and an d serial ser se sseria erial rial al num nu n numbe numb umber mber ber are a on the back off tth this hiis unit. his unit. un unit it. t.
