DVD VCR Combo User Manual

13EN 13EN
Disc
Management
Recording Playback
Introduction
Connections Basic Setup Editing Function Setup VCR Function Others
FUNCTIONAL OVERVIEW
1. INPUT SELECT button
• Press to select the appropriate input.
2. OPEN/CLOSE A button
DVD mode:
• Press to open or close the disc tray.
VCR mode:
• Press to remove the cassette tape from the cassette
compartment.
3. Number/Character buttons
• Press to enter values for the settings in the main menu.
DVD mode:
• Press to select a title/chapter/track/file on display.
• Press to enter title names.
VCR mode:
• Press to start the index/time search.
4. SETUP button
• Press to display the main menu.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
to the interlace mode.
5. DISC MENU button (DVD)
• Press to display the disc menu. To change original
and playlist on the TV screen.
6. Cursor K / L / { / B buttons
• Press to select items or settings.
7. CLEAR button
DVD mode:
• Press to clear the password once entered, to cancel
the programming for CD, to clear the selecting
marker number in the display menu, etc.
VCR mode:
• Press to reset the tape counter.
8. INSTANT SKIP button (DVD)
• During playback, press to skip 30 seconds.
9. REV E button
DVD mode:
• During playback, press to fast reverse playback.
• When playback is in pause, press to slow reverse playback.
VCR mode:
• During playback, press to view the picture rapidly in
reverse.
• Press to fast reverse the cassette tape in stop mode.
10. PLAY B button
• Press to start playback or resume playback.
11. SKIP H button (DVD)
• During playback, press to return to the beginning of
the current chapter, track or file.
• During playback, press twice in quick succession to
skip to the previous chapter or track.
• When playback is in pause, press repeatedly to
reverse the playback step by step.
12. PAUSE F button
• Press to pause playback or recording.
13. DUBBING button
• Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.
14. REPEAT button
DVD mode:
• Press to select the repeat mode.
VCR mode:
• Press to set or release the Auto Repeat Playback. In
the Auto Repeat Playback mode, tape is played to its
end, the tape will rewind to the beginning and start
playback itself.
15. TIMER SET button
• Press to set the unit in the timer standby mode. In
the timer standby mode, press to cancel the mode
and to turn the unit on.
16. HDMI button (DVD)
• Press to set the HDMI connector’s video signal
output mode.
17.
I
/
y
ON/STANDBY button
• Press to turn the unit on and off.
18. TRACKING
/ buttons (VCR)
• Press to adjust the tracking during playback or in
slow motion of the cassette tape.
• While playback is in still mode, you can stabilize the
picture.
19. SAT.LINK button
• Press to call up the Satellite Link setting.
20. TIMER PROG. button
• Press to display the timer programming list.
21. AUDIO
button
DVD mode:
• During playback, press to display the audio menu.
VCR mode:
• During the playing of a HiFi video tape, press to
change the audio out setting to HiFi or mono.
22. DISPLAY button
• Press to display the display menu on or off.
23. TOP MENU button (DVD)
• Press to display the title list.
24. ENTER button
• Press to confirm or select menu items.
25. RETURN button
• Press to return to the previous displayed menu screen.
26. TIME SLIP button (DVD)
• Press once to start recording the TV program you
are watching. Press again to watch the content
being recorded from the beginning while recording
continues. (VR mode DVD-RW with the recording
mode of LP, EP or SLP only)
27. 1.3x/0.8x PLAY button (DVD)
• During playback, press to play back in a slightly
faster/slower speed while keeping the sound output.
28. FWD D button
DVD mode:
• During playback, press to fast forward playback.
• When playback is in pause, press to slow forward playback.
VCR mode:
• During playback, press to view the picture rapidly in
forward.
• Press to fast forward the cassette tape in stop mode.
• When playback is paused, press to view the cassette
tape in slow motion.
29. SKIP G button (DVD)
• During playback, press to skip to the next chapter,
track or file.
• When playback is in pause, press repeatedly to
forward the playback step by step.
30. STOP C button
• Press to stop playback or recording.
DVD mode:
• Press to exit from the title list.
31. DVD button
• Press to select the DVD output mode.
32. VCR button
• Press to select the VCR output mode.
33. REC I button
• Press once to start a recording.
• Press repeatedly to start the one-touch timer recording.
34. REC MODE button
• Press to switch the recording mode.
35. ZOOM button (DVD)
• During playback, press to enlarge the picture on the
TV screen.
36. SEARCH button (VCR)
• Press to call up the index or time search menu.
Note
• If you turn off this unit, [OPEN/CLOSE A] on the remote
control is not available.
Be sure to use [OPEN/CLOSE A] or [STOP C / EJECT A]
on the unit.
E9KGAUD_D-VR610KU_EN.indd 13E9KGAUD_D-VR610KU_EN.indd 13 2007/12/19 13:45:282007/12/19 13:45:28