User Guide

EOl-19023

DRWST-SOA/SlA SERIES

1. INTRODUCTION

Thank you for purchasing the TEC DRWST-5OA/51A Series Remote Drawer. This drawer can be connected to

various terminals including the ST-5500, FF-5501, etc., which has been developed as a high-grade POS termi-

nal.

Large Type Drawer is provided for the DRWST50A Series and SP Type Drawer for the DRWST-51A Series.

The Large Type Drawer has the holes for attaching the LIUST-51 (Pole Type) and the printer I/F cable.

1 .I Precautions

1) Do not subject the equipment to sudden shocks.

2) The cover should be cleaned by wiping with a dry cloth or a cloth slightly dampened with a mild detergent

solution. NEVER USE THINNER OR ANY OTHER VOLATILE SOLVENT on the plastic covers.

3) DO NOT POUR WATER directly onto the drawer and NEVER IMMERSE THE DRAWER IN WATER.

4) Avoid using in locations subject to vibration and direct sunlight.

5) Be sure to install the equipment on a flat surface.

6) Be sure to use the equipment within the proper ranges of power, current consumption, temperature and

relative humidity.

7) Do not roughly open or close the drawer.

8) Never attempt to modify the TEC equipment by yourself.

2. APPEARANCE AND NOMENCLATURE

Large Type (DRWST-5OA)

Through-hole for the printer I/F Cable

Hqle for attaching the LIUST-51 (Pole Type)

rawer Cable

Cash Box

Media

slot

Drawer Release Lock

-l-