User's Manual

IPT1020-SD Settings
IPT1020-SD Function Settings
Strata CTX DKT/IPT Telephone 06/03 95
IPT1020-SD Function Settings
These steps enable you to turn On/Off button beeps, room noise cancellation, handset
Busy Override, and headset volume control. You can also adjust the setting for carbon
headsets vs. non-carbon headsets.
1. Press
++++ROG (simultaneously).
2. Press
 then +ROG.
3. Press the Feature Buttons to turn the LEDs On/Off for the desired function setting
(see Table 14).
4. Press
+ROG to set the above data.
5. Go off-hook and hang up.
5. Registering
completion
- normal
action.
LCD data is indicated from
CTX. Example:
Table 14 IPT1020-SD Function Settings
FB LED ON LED OFF
FB1 Buttons beep. Buttons do not beep.
FB3
Speakerphone/Microphone
sensitivity is lower.
Speakerphone/Microphone
sensitivity is normal.
FB4
Enable handset Busy Override
(BOV) tone.
Disable handset BOV.
FB11
Turn LED On if carbon headset
is attached.
Turn LED Off if carbon headset is not
attached.
Action LCD Indication Remarks
NO. 205
FEB 28 THURSDAY 01:09