User manual

85
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
84
Viewing
・
Listening
and Operation
Others
Set up
Introduction
Recording
PAN/TILT Operation Range
A PAN/TILT operation range of the camera can be set.
1 Click "PAN/TILT Settings" in the Administrator Setup
menu.
･ The sub menu for PAN/TILT setting will appear.
2 Click "4. Operation Range" in the sub menu.
･ A setup screen of "PAN/TILT - Operation Range Settings" will
appear.
3 Configure each setting items.
･ Click the Save button to save settings.
･ The settings will not be reflected unless the Save button is clicked.
● Setting Operation Range of Left, Right, Top and Bottom.
Align the position by using Controller Window.
ON: Enables to limit Operation Range.
OFF: Disables to limit Operation Range.
Current position: Set the current position as each limit.
NOTE
●
Moving to the preset position and in auto patrol operation has been restricted.
PAN/TILT Auto Patrol
Dwell time for Auto Patrol can be set.
1 Click "PAN/TILT Settings" in the Administrator Setup
menu.
･ The sub menu for PAN/TILT setting will appear.
2 Click "3. Auto Patrol" in the sub menu.
･ A setup screen of "PAN/TILT - Auto Patrol" will appear.
3 Configure each setting items.
･ Click the Save button to save settings.
･ The settings will not be reflected unless the Save button is clicked.
● Setting of Auto Patrol Dwell Time
Set a dwell time for Auto Patrol.
Choose from among 1, 2, 5 and 10 minutes.
This item sets the time to dwell in the position of each Preset Number.
● Settings Preset Number of Auto Patrol Dwell Position
Set whether or not to dwell at each Preset Number.