User manual

ManualsBrandsToshiba ManualsSecurity CamerasDigital Camera IK-WB21A

Viewing

・

Listening

and Operation

Introduction

Set up

Recording

Others

Viewing

・

Listening

and Operation

Introduction

Set up

Recording

Others

Number and Item Description

④

Screen changeover

Clicking the

button automatically displays a multi-

view screen with split frames in accordance with the

number of cameras set in Multi Screen setting (see page

90). Click the

button to return to the single-view

screen. A multi-view screen will not be displayed if the

Multi Screen Display function (see page 90) is set to

OFF.

⑤ Display controller Clicking the

button displays the controller in a

separate window.

⑥

Setup Menu Display

Clicking the

button will display the Setup Menu

screen in other window.

⑦ Alarm notification

This is displayed when "Motion Detection" ( page 74) or

"Alarm In" (page 74) is activated. The disappears if it

is clicked.

Displayed images When displaying present normal images, "

LIVE"

will be

displayed, and when displaying images from the Alarm

List or Record List, "PLAYBACK

will be displayed on

the screen. You can switch these views using the

controller.

Time and date The current time and date of the network camera are

shown when "

LIVE"

is displayed, and the recorded time

and date* are shown when "PLAYBACK

is displayed

on the screen. When in PLAYBACK mode, S) or E) may

be shown with the time and date. "S)" and "E)" are

sometimes displayed in the PLAYBACK mode as date

and time data. "S)" means start of playback images

and "E)," end of playback images. In these modes,

images or date and time cannot be updated. Operate

playback on the controller.



■ Moving the screen center.

1 Click on any area in the Camera Image screen.

2 The camera moves so that the clicked point becomes

the center of the image.

■ Camera image screen

Number and Item Description

① Camera name

②

Operation Buttons

③

Operation Buttons



The name of the camera displaying live images

: Each clicking of the button will zoom in on the

image. Can be zoomed in 22x at maximum..

: Clicking the button will zoom out.

: Equal size button. Click to reset to a viewer size 

according to the resolution.



: Each click of the button will adjust the near focus.



: Clicking the button will set auto focusing.

: Each click of the button will adjust the far focus.



: Clicking the button will change the display to the

button and will output sound.

Clicking the button will change the display to the

button and will not output sound.

: Clicking the

button will change the display to the

button and will output sound from the personal 

computer microphone.

Clicking the button will change the display to the

button and will not output sound from the personal 

computer microphone.



■ Audio

Audio In from the network camera can be heard through the Audio Out of

the personal computer.

Set audio input to "ON" in "Camera/Audio setting" on page 79 and set the

button of the Camera Image button to .

Viewing and listening (Cont.)