Instruction Manual

GENERAL SETTING
HOMI
1
Press [SETUP] in stop mode and use
[a / T] to select "General Setting",
then press [ENTER],
2
Use [A / T] to select "HDMI", then
press [ENTER],
HUMI
3
• You cannot select HDMI when an HDMI cable is
not connected and the item is shown in grey
color.
Use [a / ▼] to select a desired item,
then press [ENTER],
Format
HMAikSo
RGBF
4
o
When you finish with the setting,
press [SETUP] to exit.
Format (Default: RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [A / T] to select a setting, then press [ENTER].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal Is output as RGB regardless of the
setting.
Your setting will be activated.
96 EN