Instruction Manual

Recording from an External Device

Before recording from an external device, refer to the

instructions for the connection on page 44.

Turn on the TV and press

[I/O ON/STANDBY], and be sure to

select the input of the TV to which

the unit is connected.

When you want to record to the disc;

Press [DVD].

Press [OPEN/CLOSE ;^] to open the disc

tray. Place the disc to record properly.

Press [OPEN/CLOSE again to close

the disc tray.

It takes a while to load

the disc.

When you want to record to a

cassette tape;

Press [VCR].

Insert the cassette tape with an

erase-protection tab into the cassette

compartment.

Select the input of the unit which the

external device is connected. (L1, L2

or DV(L3))

• To use the input jacks on the rear of this unit;

• To use the input Jacks on the front of this unit;

Select "L2" or "DV" (L3) by using

[INPUT SELECT-0].

Press [REC MODE] to select a

recording mode.

Refer to "Recording Mode" on page 33 for DVD

or "Recording" on page 99 for VCR.

Press [• REC] on the unit to start

recording.

Start playback on the external device

to record from.

Press [«STOP] / [REJECT / «STOP]

on the unit to stop recording.

This operation may take

awhile to be completed.

EN 45