Instruction Manual

SATELLITE LINK
You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link tinner recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner's manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
• You must let the unit know which video input jack you
are using before making a recording.
Refer to "SETTINGS FOR THE VIDEO INPUT" on page 20.
1
2
TOSHIBA
□ □ □ □ □
3
4
5
Press [SAT. LINK].
Use [a / T] to select the time, media
and recording mode, then press
[ENTER].
Use [a / T] or [the Number buttons]
to set the desired starting time, then
press [►].
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in this step to set the
desired minutes.
• If you wish to go back to the left, press [◄].
Use [a / T] to select a recording
media ("DVD" or "VCR"), then press
[►].
Use [a / T] to select the recording
mode.
Refer to "Recording Mode" on page 33 for DVD
or "Recording" on page 99 for VCR.
42 EN