Manual

ading and unloading a cassette tape

Use only video cassette tapes marked _ and S{iYlgg_,.

SQPB

, Cassettes marked "VHS" (or "S-VHS') can be used with this video cassette recorder. However, S-VHS record-

ing is not possible with this unit.

, This unit is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to playback S-VHS record-

ings with regular VHS resolution.

• HQ VHS is compatible with existing VHS equipment.

Push the center of the tape until it is automatically in-

serted.

Insert the cassette tape with its labeled side facing up

and the erase prevention tab positioned at your left. An

inverted cassette tape cannot be inserted.

_ntion tab

Automatic power ON

When you insert a cassette tape, the VCR power will turn ON automatically.

Automatic playback

When loading a cassette tape without an erase prevention tab, playback will start automatically.

Unloading

Youcan ejectthe video tapewhile the unit is turned off.

Press EJECT on the unit or the remote control. _ cassette tape.

Remove the

Automatic tape eject

This unit will automatically rewind the tape when the tape has ended. And when the tape is rewound to its begin-

ning, the cassette tape will be ejected automatically.

To prevent accidental erasure

Remove the erase prevention tab with a screwdriver.

Screwdriver

To record again

Cover the hole with a piece of adhesive tape.

Tape

Tape speed and maximum recording time

Video cassette tape

Tape Speed

T-160 T-120 T-90 T-60 T-30

SP (Standard Play) 2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes

!LP (SuperLongPlay). 8 hours . 6 hours . 4-1/2 hours . 3 hours . 1-1/2 hours .

2K70101A E P44-51 44 _ 07.129, 3:56 PM