Manual

with the TV or audio component
The exact arrangement you use to interconnect various video
and audio components to the DVD/VCR is dependent on the
model and features of each component. Check the Owner's
Manual provided with each component for the location of video
and audio inputs and outputs.
Connect to a TV with Audio/Video output
Youcan enjoy playback by connecting the unit to a TV.
The unauthorized recording, use, distribution, I
or revision of television programs, videotapes,
DVDs and other materials, is prohibited under
the Copyright Laws of the United States and I
other countries, and may subject you to civil I
_and/or cr mna ab ty. _
o=
Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the supplied audio/video cable. 6".
Video output
Audio (L) output
k
Audio (R) output ___ o'_
To Video ieput--&_, To Audio (R) input
) "To Audio (L) input
Audio/video cable (not supplied)
DVD/VCR
Connect to a TV with S-Video output
If your TV has an S-Video input, you can get higher quality by connecting it with the S-Video output of the unit using
the S-Video cable instead of connecting the video input of the TV to the video output jack of the unit.
÷ ÷
DVD/VCR \ DVD audio (R) output
Connect to a TV with Component video output
You can enjoy the highest quality picture by connecting the unit's component video out jacks to the component
video input jacks of your TV with component video cables (not supplied).
DVD/VCR DVDaudio(R) output
To switch the output signals (Progressive/Interlace):
Press PROGRESSIVE to change the video output signals (480p: progressive and 480i: interlace) from Compo-
nent video output jacks.
NOTES:
. PROGRESSIVE button is not available in VCR mode.
• When the progressive mode is active, the Progressive indicator "I[_ "on the display window will light up.
17
2K70101A E P12-19 17 _ 07.1 29, 3:55 PM