Manual

÷
ging a disc name
Using the keyboard screen
This section explains the function of the keyboard
screen and how to input characters. The disc name and
the titie name can be changed using the keyboard
screen.
Keyboard screen types
The keyboard screen has three types of "Letters", "Num-
bers" and "Signs". The type can be switched over by
pressing REW or F.FWD.
Letters: This is mainly used for inputting alphabeti-
cal ietters.
For the keyboard screen of Letters, see the
previous page.
Numbers: This is used for inputting numbers.
r--
Signs: This is used for inputting symbols.
inputting characters
There are two methods for inputting characters.
Character input 1
A V, • or • to to
Press select the character
be input.
Press ENTER.
The selected character wiiI be input.
Character input 2
Example: Explained here is the procedure when you
input "F" and "J".
Press the numeric and selectkeys continuously
the character to be input.
To input F, press 3 twice.
NOTE:
When the intervaI between the pressing numeric keys
is 2 seconds or more in selecting the input character,
the selected character wilI automatically be input.
the when select the char-
Stop key operation
you
acter to be input.
The selected character will automatically be input.
m
3 Press the numeric keys where the following char-
acter is assigned.
O
When the character to be is
input
selected,
stop
the key operation.
The selected character is automatically input.
÷
75
2G10101A P71-P79 75 _ 2/25/05, 1:32 AM