Manual
TroubleShooting
@icon appears on I\_u cannot use the operation or function clue to one of the following reasons:
the screen. (1) ":2)ur DVD disc does not support tile feature (for example, angles)
(2) You've requested a title, chapter, or scan time that is out of tile correct range.
Play mode settings are The disc does not support all the selected functions.
different from the set- In this case, some settings you configure on the Setting menu may not work properl}:
tings configured with
the Setting menu.
Cannot change the Aspect ratio is fixed for DVD disc.
aspect ratio.
Check whether you selected correct digital output options in the Audio Output Options
No audio output.
u/eUH.
No video or audio output. Did you move your DVD Rccorder-VCR suddenly from a cold place to a warm place? In this
The disc tray is (jeeted case, remove discs and wait for one to two hours with the power on, and then, insert the disc
after 2 to 5 seconds, and try to playback again. It will work properly when condensation is removed.
Angle operation does not Angle operation is available only when the disc contains the images captured at difti, rcnt
work during playback of a angles.
DVD disc.
Tfic disc revolves, but , Check whether there is damage or foreign materials on your disc.
no image or bad quali- , Sonac discs with had manufacturing quality may not he played back.
• If the scene changes from dark to bright suddenl}: the screen
ty images arc output, may jitter temporarily, hut it is not a defect.
Desired sound Sound languages and subtitle languages are disc-specific.
language and Only the sound and subtitle languages contained on a DVD disc are
subtitle language are available and displayed on the disc menu.
not played.
No progressive , Check whether ' 480P" is displayed on front paneh
(480P) output. , Make sure to change the component video output using the Progressive button when the
disc is stopped.
• Point the remote control at the remote control sensor on your DVD rccordc>VCR.
The remote control Operate within distance. (15fi)
doesn't work. Remove obstacles between your DVD Rccordcr-VCR and remote control.
• Check whether the batteries are depleted.
• Read the tahlc of contents and then find and read the sections
Other problems dcscribmg your problem, and follow the directions given.
• Turn the unit off and on.
• If your problem still persists, contact your nearest Toshiba service center.
z
English - 97