Manual

| Method 2 : Connecting to an S-video
,nput jack
Connect all S-video cable(not supplied) between the S-
VIDEO OUT jack on DVD Recorder-VCR and S-VIDEO IN
jack on the TV (or AV amplifier).
• You will enjoy high quality images. S-Video separates the
picture element into black and white (Y) and color (C)
signals to pn'sent cleawr images than regular video input
mode.
| Method 3 : Connecting to Component
video input jacks(Y, CB/TB,CR/PB) in
480i mode
1. Connect Component video cables(not supplied) between
the COMPONENT VIDEO OUT jacks on DVD Recorder-
VCR and COMPONENT VIDEO IN jacks on the TV (or
AV amplifier).
2. Make sure that the disc has stopped completely before
changing the mode.
If anything is not displa}_'d on front panel displa); it is
480i Mode.
1
>
<ii:i{_
• You will enjoy high quality accurate color reproduction.
Component video separates the picture element into black
and white (Y), blue (Pb) and red (Pr) signals to present
most clear and clean images.
{_:H)_,, MdK,,ggl;,,{i_X{
Tilt' _\ Pb and Pr component output jacks of your
DVD Rccorder-VCR nmst be connected to tile
exact corresponding component input .jacks oil
your TY Otherwise, red or blue imageswill be dis-
played oil the TV screen.
• Make sure that the leftand right audio output
jack'; of your DVD Rccorder-VCR arc connected to
the left aud right audio input jack_sof your TM
respectivel}:(pagc 20)
English - 19