Manual

• When you change the connections, all devices should be turned off.

• Refer to the operation manual accompanying external devices for more information.

Stereo system Dolby Digital decoder, DTS decoder,

MD deck or DAT deck

Analog audio

input jacks

Digital audio

input jack

f:_IJre]Eel

Audio cable

(supplied)

AUDIO OUT

Audio Coaxial l

Digital cable

(commercially

available)

DIGITALAUDIO OUT

Note

• Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

If output is Dolby Digital encoded audio, connect to a Dolby

Digital decoder.

If output is DTS encoded audio, connect to a DTS decoder.

If output is encoded audio for both Dolby Digital and DTS,

connect to the decoder which encodes multiple audio

sources.

Connecting to an MD deck or DAT deck.

If not connected to any external devices.

* To complete these settings, refer to pages 135-137.

STREAM

PCM

STREAM

PCM

Notes

• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD

or DAT deck.

• By connecting this unit to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital Multi-channel

surround sound as heard in the movie theaters.

• Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

• By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the original

sound as truthfuly as possible. Multi-channel Surround System is developed by the Digital Theater System Inc.

28 EN

Connection UDindd 28 2006/01/11 16::2751