DVD Recorder Model Number: D-RW2SU, D-RW2SC

Recording Playback EditingIntroduction Connections

Basic Setup

Function Setup Others

Initial Setting

Clock Setting

■ To select a channel

You can select a channel by directly entering channel with the Number buttons on the remote control.

Notes for using the Number buttons:

• When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(For example:

117, press [1], [1], [7])

• You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).

• You can select the line input mode (“L1” or “L2”). To select “L1” by pressing [0], [0], [1]. To select “L2” by pressing [0],

[0], [2]. Details are on pages 68-69.

Notes

• If the auto presetting is cancelled during presetting, some channels not yet preset may not be received.

• The selection will depend on the number of stations that it has found.

Press [RETURN] or [SETUP] to cancel the auto presetting during scanning.

Using [K / L], select “Auto Preset”.

Press [ENTER].

The unit will start presetting channels available in your area

automatically.

Press [SETUP] after scanning.

You can select only the channels memorized in this unit by

using [CH / ].

Channel

Manual Preset

Auto Preset

Basic setup_UD.indd 33Basic setup_UD.indd 33 2006/01/11 20:19:092006/01/11 20:19:09