Manual

Con nections
Connecting an antenna and TV ( Continued )
Connect to a TV equiped with audio/video inputs.
Connect as below for watching received channels or recorded contents. Watching via the RF OUT terminal is not
available.
@
s
Go
_ (red)
To OUTPUT
(R/L)
Video/audio cable (supplied)
(white) _ (yellow)
To OUTPUT
(VIDEO)
To OUTPUT
(S-VIDEO)
S-Video cable (not supplied)
Ifthe TV has an S-video input, connect the recorder
with an S-video cable. When using an S-video
cable, do not connect the yellow video cable.
To S-video input
@
To video input (yellow)
To audio input I trod)
TV or monitor with
audio/video inputs
fll I ooD Ill_
Connect the power cord of the recorder to a wall outlet.
Make sure that the powered recorder lights the Multi display on the front panel.
To wall outlet
c:zzzza
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the recorder to your TV, make sure to turn off the power and unplug both units from the wall
outlet before any connections.
• If your television set has one audio input, connect the left and right audio outputs of the recorder to a Y cable
adapter (not supplied) and then connect to your TV.
• If you connect the recorder to a VCR with TVNCR combination, video selector or AV amplifier, the playback
picture may be distorted due to copy protection.
26