Manual

Connect your TV and the antenna to this recorder for recording and to view broadcast programs on the TV.
1
2
Disconnect the antenna cable from your TVand connect it to the RF IN (FROM
ANT.) terminal on the recorder.
Using the supplied RF cable of this recorder to connect the RF OUT (TO TV)
terminal to the TV.
VHF/UHF antenna
Antenna cable (not supplied)
/ 1 To RF IN (FROM ANT.)
TV
I
o
t_
c
o
o
0
TO wall outlet
o
(TO TV) RF cable (supplied)
2 2 i° antenna inPi
_nnimi=#' _
Antenna splitter (not supplied)_ :_
Types of an antenna terminal may vary--- / /
depending on the TV. / /
Check the type on your TV and connect II _1 / /
properly using either method as shown. _ _, _ _ / /
egF i;i
VHFQU_F_'_I"_ VHF '
O"
O
0
o
0.
O0
"0
For connecting to a cable box or a satellite system, see@ pages 27 to 29.
Note
• This connection insures accessibility of broadcast signals to your TV only. Unlike a VCR, you cannot assign
channel 3 or 4 for playback of this recorder, because an antenna input only passes through in the recorder.
You must connect this recorder to a video input of your TV to enjoy playback picture from this recorder.
(See next page.)
0
:3"
t_
25