Manual

You can select a preferred language and a sound format.
Start
Press AUDIO/SAP during playback or while
receiving a broadcast.
The current audio setting appears.
AUDIO/SAP The language code appears instead of the language
Q name. Refer to the list of languages and their
abbreviations. (_ page 126)
Press ADJUST while the audio setting is
displayed on the TV screen.
Variation of channels depends on the disc or the type of
TV broadcast.
= ADJUST+
(_) * _Mj, TV channel signals
Stereo sound
-_ "Stereo" (left channel and right channel)
-_ "Stereo I" (left channel)
-_ "Stereo R" (right channel)
(-_ Back to "Stereo")
Language name / sound recording system / No. of
channels
e.g.
The display turns off if you do not operate for more than
3 seconds.
If you press the • / • buttons to select "Output," you can
select the audio output setting (_ page 114) by using
ADJUST buttons.
• MTS Broadcast Compatibility
This recorder can receive or record MTS (Multichannel TV sound) broadcast.
By connecting the recorder to your stereo system or stereo TV, you will try the SAP or stereo sound.
SAP (Second Audio Program broadcast)
A separate audio program, usually broadcast in a second language with the main language.
Sounds in playback
You can play SAP and/or stereo broadcasts with this recorder. Refer to steps 1 and 2 to select a desired audio.
While a SAP program is received, the SAP indicator on the front panel illuminates.
67