Manual

This function enables you to pause a TV broadcast and resume viewing at a later, more convenient time,

by storing the TV broadcast temporarily on a DVD-RAM disc.

When this function is used, a DVD-RAM disc which can be recorded needs to be loaded into the recorder

beforehand.

While viewing a TV broadcast via this recorder

or immediately before it starts, press TIMESLIP.

Start

When Pause TV mode is ready, playback stops

i _ automatically.

! The recorder begins to store the broadcast on a DVD-

RAM disc the moment you press TIMESLIP button.

Locate a scene you want by the following

methods.

Fast-forward/fast-reverse:

Press FWD or REV button.

Forward/reverse Slow-motion:

First press II button then press FWD or REV button.

Forward/reverse frame by frame play:

First press II button then press ADJUST button.

• To resume normal playback, press PLAY button.

• You can play in fast-forward to within 10 seconds prior to the

current broadcast.

PressTIMESLIP to exit this mode.

The recorder stops storing the broadcast on a DVD-

RAM disc.

TIMESLIP

O A message appears and asks you whether you will save

the stored data or erase it.

Press •/I_ buttons to select, then press SELECT/

ENTER button.

• When the recording mode is set to "XP", the recorder

automatically changes "XP" to "SP" to record the broadcast.

Notes

• This function is not available during recording.

• Pause TV recording stops when the DVD-RAM disc is filled up. It will not begin if a DVD-RAM disc is full.

• While using this pause TV recording, you cannot program a recording.

• Playback may jump a few seconds back or pause depending on a disc or data condition.