Manual

You can record programs from connected equipment on a DVD-RAM/R/RW disc.
Connect according to A or B.
*To record a clearer picture,
use the S video jack.
!
m
Tovideo
output jack
External equipment
........................ )
A: Using the input jacks on the rear of the recorder INPUT1 (L-l)
Video cable t
lutput'°videof| Audio cable
ack |To audio Red White Yellow
L_utput jacks
) )
To audio Rear of the recorder
output jacks
Audio cable B: Using the input jacks on the front of the recorder
Ye,ow w ,te
INPUT 2 (L-2)
• Preparation
• Load a DVD-RAM/R/RW into the recorder.
- Load a disc which has sufficient remaining space to record the program.
- Make sure the loaded disc is not write-protected.
Notes
• If a source of high quality sound track such as DVD audio is recorded with this recorder, the sound quality becomes regular
audio CD quality. Refer to the instructions of the connected equipment.
• When you record an external source onto a DVD-R/RW disc, set the connected equipment to output sound you want to
record (if selectable such as multiplex broadcasting), as the recorder records sounds of external source in the stereo type
onto a DVD-R/RW disc, neglecting the setting of "DVD compatible mode" (_ page 33).
• DVD-R/RW discs cannot record contents with copy restriction signal embedded (copy-protected or copy once contents),
DVD-RAM discs can record copy once contents.
• Some satellite programs via a connected tuner may contain both 4:3 pictures and 16:9 pictures. DVD-R/RW discs cannot
record such contents, under restriction of the DVD-Video standard. To record these programs, use DVD-RAM discs.
38