Manual

• Entering characters

The cursor may be followed by unwanted characters.

You can erase them if necessary by either of the

following measures:

Erasing characters

• Erasing all the characters on the writing board

Select "Clear All" by pressing • / • / • / 1_buttons, then

press SELECT/ENTER button.

Alternatively, press CLEAR button.

• Erasing one character before the cursor

Select "BkSp" by pressing • / • / • / I_ buttons, then

press SELECT/ENTER button.

(1) Press || button to select an input mode.

(2) Press • / • / • / 1_buttons to select a character, then

press SELECT/ENTER button.

The selected character is input on the cursor.

(3) Repeat steps (1) and (2) to enter characters.

(4) When finished, press _ button to save the

characters.

The characters you entered appears.

Notes

• You can enter up to 64 characters.

• When unnecessary information appears, or when you want

to alter the input character, press CLEAR button to erase

all, or select "BkSp" or "Delete" to erase an unnecessary

character.