Installation guide

Press • / • to select "Auto", then press

SELECT/ENTER.

<_ The recorder starts scanning and active channels are

stored in the recorder in ascending order.

The display returns to the previous screen after setting

is completed.

• Adding or erasing channels

Adding channels

If a desired channel cannot be scanned automatically

because of a weak signal, it can be added to the

memory.

Erasing channels

You can erase a stored channel from the memory.

1) Select "Manual" at step 6.

2) Press • / • to select a channel you want to add

or erase.

For cable channels, refer to the chart below page.

3) Press ADJUST (-/+) to select "Add" or "Erase".

Add : Adding channels

Erase : Erasing channels

e,g,

4) Press SELECT/ENTER.

The confirmation message appears.

Press the <1/I_. buttons to select "Yes", then press

the SELECT/ENTER button.

Channel reference

Number on the recorder CH NUMBER 1 2 3 4 ,5 6 7 8 9

Corresponding channel number TV - 2 3 4 5 6 7 8 9

CcableSTD(HRC/IRC) 1(A-8) 2 3 4 5(A-7)6(A-6) 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

10 11 12 13 A B C D E F G H I J K L M N O P Q

31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

R S T U V W AA BB CC DD EE FF GG HH II JJ KK LL MM NN CO

52 ,53 54 55 56 ,57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 ...

52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 - ...

PP QQ RR SS TT UU VV WW XX YY ZZ AAABBB 65 66 67 68 69 70 71 ...

93 94 95 96 97 98 99 100 101 102 103 ... 121 122 123 124 125

93 94 A-5 A-4 A-3 A-2 A-1 100 101 102 103 ... 121 122 123 124 125

Cable signals

• STD (standard) cable TV signals

• HRC (Harmonic Related Carriers) cable TV signals

• IRC (Incremental Related Carriers) cable TV signals

IRC is also called ICC (Incremental Coherent Carriers)

"A: Initial settings" is complete. Go to "B: Output sound setting". (_ page 38)