High Resolution CCD Color Camera Data Specification

Rev 1.0

[Output signal specification]

(1) WEN DC IN connector output

・Signal level 4 V (p-p)

・Polarity Positive polarity

・Pulse width Approximately 53.3μs

［Dimensions］

(1) Lens mount C-mount

*Depending on the lens you use, the performance of the camera may not

be brought out fully due to the deterioration in resolution and brightness

in the peripheral area, occurrence of a ghost, aberration and others.

When you check the combination between the lens and camera, be sure

to use the lens you actually use.

(2) Flange back 17.526 mm

(3) Dimensions 54 mm (W) x 43 mm (H) x 59 mm (D)

(4) Mass Approximately 150 g

(5) Camera body grounding: insulation status

Conductive between circuit GND and camera body

［Operating ambient conditions］

(1) Performance assurance Temperature : 0 to 40°C

Humidity : 10 to 90% (no condensation)

［Typical spectral response］

The lens characteristics and light source characteristics is not reflected in table.

400 450 500 550 600 650 700

0.0

0.2

0.4

0.6

0.8

1.0

Wave Length[nm]

Relative Response

［Applicable safety standards］

(1) EMC （Electro-Magnetic Compatibility）

EMI（Electro-Magnetic Interference） :EN61000-6-3 / 2001

EMS（Electro-Magnetic Susceptibility） :EN61000-6-2 / 2001

(2) FCC :FCC Part 15 Subpart B class A

D4134176A