High Resolution CCD Color Camera Data Specification

Rev 1.0

(13) Power supply voltage DC12 V ± 10% (ripple 50 mV(p-p) or less)

(14) Power consumption Approximately 2.8 W

［Electronic shutter specification］

(1) Shutter speed AE/MANU switching (initial factory setting: MANU)

・Readout mode

All pixel readout 1/15 to 1/35000 s (1250 levels)

Partial scan 1/30 to 1/35000 s (625 levels)

High-speed draft readout 1/48 to 1/35000 s (313 levels)

(2) Random trigger shutter ON/OFF switching (initial factory setting: OFF)

・Fixed mode The exposure time depends on the shutter speed setting.

・Pulse width mode The exposure time depends on the pulse width.

(3) Multiple-shutter ON/OFF switching (initial factory setting: OFF)

Exposure by TRIG input, readout by MULTI input

* Enabled when random trigger shutter is ON.

[Internal sync signal specification]

(1) Driving frequency 36.000 MHz

(2) Scanning frequency

・Readout mode

All pixel readout Horizontal :18.750 kHz

Vertical :15.000 Hz

Partial scan Horizontal :18.750 kHz

Vertical :30.000 Hz

High-speed draft readout Horizontal :15.000 kHz

Vertical :47.293 Hz

［Input signal specification］

(1) TRIG Camera link I/F and DC IN connector input

・Signal level (DC IN input) TTL level

・Polarity Positive/Negative polarity switching possible (initial factory setting: Negative)

・Pulse width 53.3μs or more

(2) MULTI Camera link I/F input

・Polarity Negative polarity

・Pulse width 53.3μs to 10 ms

D4134176A