user manual

4 EDITING FUNCTIONS
124 Tab Paper
Range of the tab width and shift width
The tab width and shift width can be set in the following ranges. They are different when the tab paper is set in the
drawer and on the bypass tray.
Measuring the tab width and shift width on the original glass
The tab width and shift width can be measured by the scale on the left and rear side of the original glass. The
marks of the original scale have a 2 mm (0.08") pitch.
 COPY ON TAB
The original is copied on the tab paper.
Set the tab width and shift width using [TAB EXTENSION] in advance.
1
Prepare and place the original to copy on the tab paper.
 P.121 “Preparing an original to copy on the tab paper”
 P.121 “Setting tab paper”
2
Place tab paper.
 P.121 “Setting tab paper”
Tab width Shift width
Drawer 12 - 17 mm (0.4" - 0.6") 0 - 30 mm (0 - 1.1")
Bypass tray 10 - 20 mm (0.4" - 0.7") 0 - 30 mm (0 - 1.1")
Measuring the tab width
Place tab paper on the original glass to measure the tab width.
Measuring the shift width
Place the original on the original glass to measure the shift width.
Original scale
Aligned with the scale
Tab width
Original scale
Aligned with
the scale
Shift width