User manual
Table Of Contents
- Notice to Users
- Lineup of Our Manuals
- Before Reading This Manual
- CONTENTS
- Toshiba Quality is Second to None
- Features of the e-STUDIO2500c/3500c/3510c
- General Precautions
- Disclaimer Notice
- Forgery Prevention Function/Storage of Color Copies
- BEFORE USING EQUIPMENT
- HOW TO MAKE COPIES
- SETTING OF BASIC COPY MODES
- IMAGE ADJUSTMENT
- USING THE EDITING FUNCTIONS
- e-FILING
- TEMPLATE
- JOB STATUS
- BLINKING GRAPHIC SYMBOLS
- Blinking Graphic Symbols
- Drawer Display on the Touch Panel
- Replace Toner Cartridge Symbol
- Replace Toner Bag Symbol
- Jam Symbols
- Misfeed in the Reversing Automatic Document Feeder (optional)
- Misfeed in drawer feeding area
- Misfeed in the Large Capacity Feeder (optional)
- Misfeed in the Paper Feed Pedestal (optional)
- Misfeed on the bypass tray
- Misfeed in the automatic duplexing unit
- Misfeed in the jam releasing cover
- Misfeed in the fuser unit
- Misfeed in the Bridge Unit (optional)
- Misfeed in the Finisher and the Hole Punch Unit (optional: MJ-1101, MJ-6101)
- Misfeed in the Saddle Stitch Finisher and the Hole Punch Unit (optional: MJ-1030, MJ-6004)
- Misfeed in the Saddle Stitch Unit (optional)
- Call Service Symbol
- WHEN THIS MESSAGE APPEARS
- “Toner near Empty”
- “Time for Slit glass and Main charger cleaning”
- “Check staple cartridge”
- “Check staple cartridge in the Saddle Stitch Unit”
- “Examine stapler”
- “READY (CHECK STAPLER)”
- “Examine stapler in the Saddle Stitch Unit”
- “READY (CHECK SADDLE STITCH STAPLER)”
- “READY (HOLE PUNCH DUST BIN IS FULL)”
- “POWER FAILURE”
- “Time for periodic maintenance”
- “Check paper size setting on control panel for drawer N”
- “Cannot print this paper size Select the other drawer”
- “Cannot print this paper type Set the other paper type”
- “Reboot the machine”
- MAINTENANCE
- SPECIFICATIONS & OPTIONS
- INDEX
12 SPECIFICATIONS & OPTIONS
374 e-STUDIO2500c/3500c/3510c Specifications
e-STUDIO2500c/3500c/3510c Specifications
y This specification varies depending on the copying conditions and the environment.
y Specifications and appearance are subject to change without notice in the interest of product
improvement.
Model name FC-2500C/FC-3500C/FC-3510C
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fixing method Belt fusing
Photosensor type OPC
Original scanning system Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning
system by feeding the original)
Original scanning sensor Linear CCD sensor
Scanning light source Xenon lamp
Resolution Scanning 600 dpi x 600 dpi
Writing Black-and-white: 2400 dpi x 600 dpi (Smoothing process),1 bit Color, Image
smoothing: 600 dpi x 600 dpi, 8 bits
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. LD
Acceptable copy
paper size
Drawer LD, LG, LT, LT-R, ST-R, COMP, 13" LG, 8.5" SQ, 8K, 16K, 16K-R, A3, A4, A4-R,
A5-R, B4, B5, B5-R, FOLIO
Bypass Paper size within 5 1/2" - 12" (Length), 8 1/2" - 18" (Width)
Acceptable copy
paper weight
Drawer 17 - 43 lb. Bond (90 lb. Index)
Bypass 17 - 80 lb. Cover (140 lb. Index)
Warm-up time Approx. 99 seconds
First copy time (LT portrait) Black-and-white
e-STUDIO2500c/3500c: Approx. 6.5 seconds
e-STUDIO3510c: Approx. 5.2 seconds
Color
Approx. 8.5 seconds
Continuous copy speed See P.375 “Continuous copying speed”.
Multiple copying Up to 999 copies (digital key entry)
Excluded image
width
Black-and-white Leading edge: 0.12"±0.08", Trailing edge: 0.12"±0.08",
Both edge: 0.08"±0.08"
Color Leading edge: 0.20"+0.08/-0.04", Trailing edge: 0.12"±0.08",
Both edge: 0.08"±0.08"
Printer (Black-
and-white/Color)
Leading edge: 0.20"+0.08/-0.04", Trailing edge: 0.20"±0.08",
Both edge: 0.20"±0.08"
Reproduction
ratio
Actual size 100±0.5%
Zoom 25 - 400% (in 1% increments)
For the Reversing Automatic Document Feeder 25 - 200%
(in 1% increments)
Paper supply Drawer Approx. 550 sheets (20 lb. Bond), Approx. 500 sheets (28 lb. Bond)
Bypass Approx. 100 sheets (20 lb. Bond), Approx. 80 sheets (28 lb. Bond)
Receiving tray loading capacity Approx. 550 sheets (28 lb. Bond)
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 11 exposure step
USB interface USB (Full speed)
Environment (for normal use) Temperature: 10 º - 30 ºC (50 º - 86 ºF) , Humidity: 20 - 85% (No Condensation)
Power requirements AC 115 V±10%, 12 A (50/60 Hz)
Power consumption 1.5 kW or less (including optional equipments)
Dimensions (equipment only) 27.5" (W) x 30.0" (D) x 29.9" (H)
Weight Approx. 264 lb. (equipment including developer and drum)
Space occupied (equipment only) 41.5" (W) x 33.7" (D)
Storage capacity Max. 1000 sheets or until the memory is full (Toshiba’s own chart)