CMOS Color Camera Instruction Manual

19
(c) Changing color temperature setting
㽲 Move the “㸢” to C.TEMP by pressing [MENU UP], [MENU DOWN] buttons.
㽳 Select either 3200K or 5600K by pressing [DATA UP], [DATA DOWN] buttons.
(a) Changing R PAINT
㽲 Move the “㸢” to R PAINT by pressing [MENU UP], [MENU DOWN] buttons.
㽳 Select the desired value of red paint by pressing [DATA UP], [DATA DOWN] buttons.
(b) Changing B PAINT
㽲 Move the “㸢” to B PAINT by pressing [MENU UP], [MENU DOWN] buttons.
㽳 Select the desired value of blue paint by pressing [DATA UP], [DATA DOWN] buttons.
(d) Confirming the contents of the zone area selected by AWB
㽲 Move the “㸢” to AREA DISP by pressing [MENU UP], [MENU DOWN] buttons.
㽳 Select the desired area by pressing [DATA UP], [DATA DOWN] buttons.
-10 0 10
[
DATA UP
] ޓRed is increased.
Red is decreased. ޓ [
DATA DOWN
]
-10 0 10
[
DATA UP
] ޓBlue is increased.
Blue is decreased. ޓ [
DATA DOWN
]
The available picture area is shown by the shading correction on the screen that is parted in 64.
PRESET A PRESET B PRESET D PRESET C
PRESET E
Note:
These picture areas are not displayed on the screen.
IK-HR1D_EN.indd 19IK-HR1D_EN.indd 19 2008/08/12 15:56:502008/08/12 15:56:50