User's Manual

Basic Operations 39
Making a Call
1. Confirm that the power is on.
Confirm that the signal level is sufficient.
2. In standby mode, enter a phone number.
If you enter the wrong number, each press of (Clear) deletes the digit on the
far right.
3. Press .
4. Press to end the call.
Making an International Call
1. In standby mode, press and hold .
+ appears.
2. Enter the country code, area code and other party's phone number.
If the other party’s phone number begins with 0, omit the first 0.
3. Press .
Sending Tones
You can send DTMF tones by pressing digit keys during a call.
To disable the sending of DTMF tones, press (Options) during a call and select
DTMF Off.
Tip
• You can perform the following
operations if you press
(Options) after entering a phone
number in standby mode.
• Voice Call: Makes a voice call.
• Video Call: Makes a video call
(page 85).
• Save to Contacts: Saves the
phone number to the Contacts
list (page 64).
• Send Message: Allows you to
create an SMS/MMS message
(pages 133, 144).
• You can also make a call from the
Contacts list (page 75) or the call
log (page 43).