User's Manual

File Transfer & Synchronisation

295

◆ Bring the infrared port (page 292) of your phone to within approximately 5 metres

of the TV or other electric home appliance. Do not place an object between them.

◆ Your phone may not work properly as a remote controller in direct sunlight,

directly under fluorescent lighting or near other infrared devices.

◆ A dirty infrared port may cause an operation failure. Gently remove any dirt with a

soft cloth while making sure not to scratch the port.

Using a USB Cable for Transferring Data

As shown in the illustration on the left, you can use a USB cable to connect your phone

to a PC and then transfer Contacts list, Calendar and My Items data. Before you connect

the USB cable, the USB host driver and PC management software My Mobile included

on the CD-ROM supplied with your phone need to be installed on the PC. This function

supports USB 1.1 and USB 2.0. For details on the PC operating environment required to

use this function, refer to My Mobile.

Using a USB Cable for Sending Data

You can send the data of the Contacts list, Calendar and My Items.

1. Follow the procedure below to connect your phone and a PC with a USB cable.

1) Open the external connector cover of your phone.

2) Insert the plug of the USB cable into the external connector.

3) Connect the USB cable to the USB port of the PC.

2. In standby mode, press , select Settings and press (Select).

3. Select Connectivity and press (Select).

Note

• When you send/receive data, flight

mode is set automatically. The

indicator appears at the top of the

display while flight mode is set,

except when a dial-up connection

was established. When the

sending/receiving of data is

complete, flight mode is cancelled.

• The following files cannot be sent.

• Files in Games&More, My Saved

Pages and Templates of My

Items