User's Manual

Settings 259
Internet Settings
You can edit the network access point (NAP) information used when modifying
application settings (page 258). You can register information for up to 20 NAP.
1. In standby mode, press , select Settings and press (Select).
2. Select Network&Internet and press (Select).
3. Select Internet and press (Select).
4. Select <Empty> and press (Add).
5. Select the item you want to set and press .
6. Enter/select information.
For each item, press or (OK) and set the information.
7. Press (Options) after the settings the items.
8. Select Save and press (Select).
A confirmation screen appears.
9. Press (Yes).
Tip
To display, copy or delete NAP
information, select information after
Step 3 and press (Options).
However, any profile indicated by
cannot be displayed or copied.
Also, preset factory NAP cannot be
deleted.