User's Manual

Video Telephony

Setting the Backlight

You can set whether the backlight is lit during an appearance check or video call.

1. In standby mode, press , select Backlight and press (Select).

2. Select On or Off and press (Select).

Hold Guidance Settings

You can set the picture displayed to the other party when you place an incoming video

call or video call in progress on hold.

1. In standby mode, press , select Hold Guidance and press (Select).

2. Select the item you want to set and press (Select).

◆ Hold Answer: Allows you to set the hold guidance for incoming calls.

◆ Hold during Call: Allows you to set the hold guidance for calls in progress.

3. Select the image type you want to set and press (Select).

◆ Preset Picture: Allows you to set the default picture.

◆ My Pictures: Allows you to select a picture from the Pictures folder of My Items.

Select the picture you want to set, press and then press (Set).

Note

• You can send pictures of QVGA

(W240 × H320) size or smaller.

• A copyright protected picture

cannot be selected.