User's Manual

Video Telephony 89
Using the Zoom
You can enlarge the image to be sent to the other party during a call.
To use the zoom, press during a call.
Switching Screen Display
You can select the screen display method during a call.
1. Press (Options) during a call.
2. Select Screen Settings and press (Select).
3. Select Switch Screens and press (Select).
4. Select the display method you want to set and press (Select).
◆ Priority Incoming: Displays a large incoming screen and a small outgoing
screen.
◆ Incoming Only: Displays only the incoming screen.
◆ Priority Outgoing: Displays a small incoming screen and a large outgoing
screen.
◆ Outgoing Only: Displays only the outgoing screen.
Turning On/Off the Outgoing Video
You can turn on/off the sending of images recorded with the camera during a call. To
turn off the outgoing video, press during a call. To turn the outgoing video back on,
press again.
Note
The zoom is disabled while sending a
picture (page 90) or when image
transfer is set to off.