User's Manual

21
English
• [Video Adjust]
6HOHFWDSUHGH¿QHGVHWWLQJRIWKHYLGHR
1. Press OK .
2. PressW/X(to(adjust(the(video(
ƌŝŐŚƚŶĞƐƐ͕ŽŶƚƌĂƐƚ͕,ƵĞĂŶĚ^ĂƚƵƌĂƟŽŶ͘
{Brightness}- press W/X to adjust the
brightness of display, goes left means
dark and right means bright.
{Contrast}- press W/X to adjust the
contrast of display, goes left means low
contrast and right means high contrast.
{Hue}- press W/X to adjust the Hue of
display, goes left means low hue and
right means high hue.
{Saturation}- press W/X to adjust the
saturation of display, goes left means
low Saturation and right means high
saturation.
3. Press RETURN to exit.
Brightness
Contrast
Hue
Saturation
Return ExitChange
• [Sharpness]
Select the level of sharpness: High,
Medium, Low
{High}- Select High sharpness level
{Medium}- Select Medium sharpness
level
{Low} - Select Low sharpness level
[Motion Video Process]
TV
Video Mode Standard
Noise Reduction 0
Video Process
Motion Video...
Color Adjust
... Display Setting...
SETUP Exit
Move cursor key to select menu option
then use “OK” key to select
• [Video Mode]
Select the output mode of video,options
include: Standard, Vivid, Cinema, Custom,
these can change the output display.
{Standard} output video signal without
any processing and in standard mode.
{Vivid} output video signal in vibrant
color mode.
{Cinema} output video signal in cinema
mode.
{Custom`\RXFDQGH¿QH\RXURZQYLGHR
mode by adjusting the video Brightness,
Saturation, Hue, Contrast, Sharpness and
CTI.
• [Color Adjust]
<RXFDQGH¿QH\RXURZQ&RORU
adjustment when you select the Custom
video mode and you can adjust the Color
of red, green, blue, yellow, cyan and
magenta.
{Red`'H¿QH\RXURZQUHG&RORUE\
adjusting the brightness, saturation and hue.
{Green} 'H¿QH\RXURZQJUHHQ&RORUE\
adjusting the brightness, saturation and hue.
{Blue} 'H¿QH\RXURZQEOXH&RORUE\
adjusting the brightness, saturation and hue.
{Yellow`'H¿QH\RXURZQ\HOORZ&RORU
by adjusting the brightness, saturation
and hue.
{Cyan} 'H¿QH\RXURZQF\DQ&RORUE\
adjusting the brightness, saturation and hue.
{Magenta} 'H¿QH\RXURZQPDJHQWD&RORU
by adjusting the brightness,saturation and hue.
• [Noise Reduction]
Reduces the noise of the playback picture.
{0} – Shows the original picture as
recorded.
{1} – Executes 3D noise reduction which
detects and deletes the noise by
comparing each picture frames.
{2} – Executes MPEG noise reduction
which reduces the block noise and
mosquito noise on the subtitles on the
movie.
{3} – Executes both MPEG noise
reduction and 3D noise reduction.
Audio Setting
1. Press SETUP
[General Setting] menu is displayed.
2. Press X to select [Audio Setting],
then press T .
3. Select an option, press X to access.
SETUP Exit
Audio Output
Spdif
PCM
PCM
48K
HDMI
Down_samp
OffDRC
... Audio Setting...
Move cursor key to select menu option
then use “OK” key to select
4. Press S/T to select a setup option and
press X
5. Select the setting you wish to change
DQGSUHVV2.WRFRQ¿UP
- Press W to return to the previous
menu.
- Press SETUP to exit the menu.
[Audio Output]
• [Spdif]
Select the output mode of COAXIAL