User's Manual

12
English
4 Preparation
Always follow the instructions in this chapter
in sequence.
Note:
&*Use*of*controls*or*adjustments*or*
performance*of*procedures*other*than*herein*
ŵĂLJƌĞƐƵůƚŝŶŚĂnjĂƌĚŽƵƐƌĂĚŝĂƟŽŶĞdžƉŽƐƵƌĞŽƌ
ŽƚŚĞƌƵŶƐĂĨĞŽƉĞƌĂƟŽŶ͘
Prepare the remote control
1.Open the battery compartment.
2.Insert two R03 batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Notes:**
&*If*you*are*not*going*to*use*the*remote*control*
ĨŽƌĂůŽŶŐƟŵĞ͕ƌĞŵŽǀĞƚŚĞďĂƩĞƌŝĞƐ͘
ͲŽŶŽƚƵƐĞŽůĚĂŶĚŶĞǁŽƌĚŝīĞƌĞŶƚ ƚLJƉĞƐ ŽĨ
ďĂƩĞƌŝĞƐŝŶĐŽŵďŝŶĂƟŽŶ͘
Ͳ ZŝƐŬ ŽĨ ĞdžƉůŽƐŝŽŶ͊ <ĞĞƉ ďĂƩĞƌŝĞƐ ĂǁĂLJ ĨƌŽŵ
ŚĞĂƚ͕ƐƵŶƐŚŝŶĞŽƌĮƌĞ͘EĞǀĞƌĚŝƐĐĂƌĚďĂƩĞƌŝĞƐŝŶ
ĮƌĞ͘
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 9 m
- Either side of the centre: approx. 7 m
within 30°
- Above: approx. 7 m within 30°
- Below: approx. 7 m within 30°
USB
7 m9 m7 m
Setting up the player
Find the correct viewing channel
1.Press
 to turn on this product.
2.Turn on the TV and switch to the correct
video-in channel (refer to the TV user
manual on how to select the correct
channel)
Initial Setting
When you turn on this unit for the
¿UVWWLPH\RXQHHGWRIROORZWKHVHVWHSV
1. A welcome page will be displayed when
this product is powered on.
2. Press OK to enter language setting.
3. Select your desired language,
resolution and aspect ratio using
S/T,
then press OK.
4. Press SETUP to exit the Setup menu.
Use the SETUP menu
1.Press SETUP to display the Setup menu
when the BD Player is playing or no disc.
And press SETUP to exit the Setup menu.
Select menu display language
1.Press SETUP
[General Setting] menu is displayed
2.Select [Language], then press X
3.Select [OSD], then press X.
- The language options may vary for
different regions.
4.Press S/T to select a language, then
press OK
Note:
&*If*this*disc*player*is*connected*to*a*HDMI*CEC*
ĐŽŵƉůŝĂŶƚds͕ƐŬŝƉƚŚŝƐƐĞƚƚŝŶŐ͘/ƚƐǁŝƚĐŚĞƐ
automatically*to*the*same*OSD*menu*language*
as*per*your*TV*setting.