User's Manual

31EN
FUNCTION SETUP
Category Menus / Options Description
Custom
Others Network
Connection
•Refer to pages36-
38 for more
information.
Connection
Test
Performs the network connection test. After you
change the IP Address or DNS Setting, always perform
this test.
Enable
(Easy)
If you select “Enable(Easy)”, Connection test will
automatically start.
Enable
(Custom)
IP Address
Setting
Auto (DHCP) Sets the IP Address.
In most cases, you can connect to the Internet without
making any changes to the default setting.
Manual
IP Address Input field Allows you to set “IP Address”, “Subnet Mask” and
“Default Gateway” manually.
•Available only when “Manual” is selected in “IP
Address Setting”.
Subnet
Mask
Default
Gateway
DNS
Setting
Auto (DHCP) Sets the DNS Setting.
In most cases, you can connect to the Internet without
making any changes to the default setting.
Manual
Primary
DNS
Input field Allows you to set “Primary DNS” and “Secondary DNS”
manually.
•Available only when “Manual” is selected in “DNS
Setting”.
Secondary
DNS
Proxy
Setting
Do Not Use Sets the proxy server.
In most cases, you can connect to the Internet without
using proxy server.
Use
Proxy
Address
Input field Allows you to set “Proxy Address” and “Proxy Port”
manually.
• Available only when “Use” is selected in “Proxy
Setting”.
Proxy Port
Connection
Speed
Auto Sets the connection speed.
In most cases, you can connect to the Internet without
making any changes to the default setting.
10BASE Half
10BASE Full
100BASE Half
100BASE Full
BD-Live
Setting
Allow You can restrict Internet access when BD-Live
functions are used.
Limited
Allow
Prohibit
MAC Address You can check the MAC Address.
Disable Deactivates the network connection.
Software Update
•Refer to page39
for more
information.
Current
Version
Indicates the current firmware version.
Disc
Update
No Allows you to update this unit’s firmware using a disc.
Yes
Initialize
Setup No
•Refer to page 39 for more information.
Resets all the settings, except for “Parental” and
“Network Connection” to the factory default.
Yes
Format SD
Card
No Re-formats SD card.
Yes
Erase Saved
BD-ROM
Data (Player)
No Re-formats local storage (Player) used for BD-Java.
Yes
Erase Saved
BD-ROM
Data (SD
Card)
No Re-formats local storage (SD card) used for BD-Java.
Yes
Network
Settings
No Initialises network settings.
Yes
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
E5RJ2ED_EN.book Page 31 Thursday, October 29, 2009 3:30 PM