Datasheet
TOSHIBA TELECOM Mod 13 GS35F0099L
BPTU1A ISDN Primary Rate Interface Unit.
Provides 23 channels for ISDN PRI service on CTX670, CTX100 or DK424i,
and 12 channels for DK40i (requires R4.3). Strata® Net CTX network
connection using BPTU1A PRI interface always requires an external CSU.
Requires RPRI-CBL-KIT.
1,413.
BPX100 NetLink i640 Wireless Telephone Battery Pack
Nickel Metal Hydride (NiMH) Battery Pack for NetLink i640 Wireless
Telephones
54.
BRCS1A-12 12-circuit DTMF Receiver Subassembly.
1 per processor PCB for connection of DTMF standard telephones, DISA
lines, DTMF DID lines, Tie lines, Voice Mail devices, or built-in Auto
Attendant. Mounts on DK424i processor PCB.
540.
BRCS1A-4 4-circuit DTMF Receiver Subassembly.
1 per processor PCB for connection of DTMF standard telephones, DISA
lines, DTMF DID lines, Tie lines, Voice Mail devices, or built-in Auto
Attendant. Mounts on DK424i processor PCB.
248.
BRCS1A-8 8-circuit DTMF Receiver Subassembly.
1 per processor PCB for connection of DTMF standard telephones, DISA
lines, DTMF DID lines, Tie lines, Voice Mail devices, or built-in Auto
Attendant. Mounts on DK424i processor PCB.
433.
BRPSB120A 3-outlet 120VAC Power strip for CTX Rack Mount Cab.
One Required for 3 Rack Mount cabinets, two required for 4 or 5 Rack Mount
cabinets (two isolated 120vac AC outlets required).
86.
BRPSB240A 3-outlet 240VAC Power strip for CTX Rack Mount Cab
Always Required for 6 or 7 Rack Mount cabinet CTX670 systems. Two
required for 4 or 5 Rack Mount cabinets ( one isolated 240vac AC outlet
required.) Three required for 6 or 7 Rack Mount cabinets ( one isolated
240vac AC outlet required).
186.
BRPSU672A Power Supply for CTX670A/DK424i Rack Mount Cabinet.
Spare Power Supply for CTX670 Base or Expansion Rack Mount cabinet.
This power supply comes equipped from factory in Rack Mount cabinets.
331.
BSIS1A 4-port Serial Interface Subassembly.
Provides two RS-232 serial ports with modular jacks. Required for SMDR or
SMDI. Mounts on ACTU or BECU processor card. Includes 1 serial port
license. Additional serial port license required to activate serial port 2.
189.
BSTU1A 8-circuit Standard Telephone Interface Unit with MW.
Provides 8 standard telephone station ports. 1 port per DTMF or rotary
telephone, or peripheral device such as Voice Mail, Auto Attendant, fax, etc.
1 port per off-premises station, type OL13B line.
484.
BT2499 800 mAh Rechargeable Battery for DKT2204-CT Cordless.
For replacements or spares. Provides about 6 hours maximum talk time. 90-
day warranty on rechargeable battery.
33.
BT930 750 mAh Rechargeable Battery for DKT2304-CT Cordless.
For replacements or spares. Provides about 7 hours maximum talk time. 90-
day warranty on rechargeable battery.
16.
BTSA1A Adjustable Tilt Stand for Digital phone & Add-On-Module
Attaches to the base of a 3000-series or 2000-series digital telephone to
provide flexible angle adjustment of the telephone body and attached Add-on
Module.
15.
BTSD1A Adjustable Tilt Stand for Digital Telephone - Gray.
Attaches to the base of a 3000-series or 2000-series digital telephone to
provide flexible angle adjustment of the telephone body.
12.
BUR1-4.3 R4.3 Upgrade Kit for DK424i B1CU1A.
Use 1 kit to upgrade B1CU1A to latest version Release 4.3 software.
Instructions included.
91.
bgoodwin Page 7 9/30/2004