Manual

Probmem somution
Sound problems
Remote control problems
Channeltuning probbms
Closedcaption problems
Rating Blocking {V-Chip}1problems
Recording problems
Other problems
Check the antenna/cable connections (see Chapter 2}1.
Thestation raayhave broadcast difficulties Tryanother channel
Thesound may be muted. PressVOLU M E.
[fyou hear no sound,try setting the MTS feature to STEREOmode {page 79}1
Make sure the SPEAKERSfur/orionin the AUD!O SETUPn/enu isset correctly (page 81}1
Ifyou are not receivinga second audio program from a known SAPsource make sure the M[S featureis
set to SAPmode (page 79}/.
* [fyOUhear audio tha[ seems "incorrect' for the program you are watching (such as mLisioor a foreign
language}},the SAP mode may be on. Setthe MTS feature to STEREOmode (page 79}1.
o When using an external audio amplifier,if you connect the amplifierto the VAR AUDIO OUTjacks, the
volumeof the TVand amplifier must be set above 0 or you will not hearany sound (page 20}1.
o Make sure the ten/ore control isset to the correct device mode (page 27}1.
o Ren/oveallobstructior/s between the rernote control arid the TV
o Theremo[e control batteries maybe dead. Replacethe batteries (page 27}1.
o YourTV remote cor/troJraay no{ operale cedain featureson your externaldevice. Referlo the owner's
manualfor your other device to determine its avaiBble features.If your TV remote control does not
operate a specific feature oil another device, use the remote control that came with the device {page 27}1.
o [fthe TVslops responding to the controls on the remote control or TV front panel and you cannot turf/off
the 'r'v,press the RESETbutton or/the front panel (see page 9 for detaiB}1.Ifthe TV still does not act as
expected usethe Restore Factory Defaults procedure as described on page 51
o Make sure the remote conlrol is set to the correct device raode (page 27}1.
o Thechannel may have beerserased from the channel rneraoryby the CHAN N EL ADD/DELETE feature
Add the channelto the channel memory (page 42}1.
o Thechannel may be blocked by the CHANNELS BLOCKfeature. Unblock the channel {page 90}1.
o [fyou are unableto tune digital channels, check the antennaconfiguration (page 40}. If you are still
unableto tune digital channels, dear all channelsfi-ornthe channel list (page 42}1and reprogram
channeb into the channel memol}/(page 41}1ifyou are still unabb to tune digital channels use the
Restore Factoly Defaults procedure as described on page 51.
o [fthe program or video you selected is riot closed-captioned, no captions will display on-screen
(page 78}.
o [ftext is riot avaiBbb a black rectangle mayappear on-screer/[f this flappens, turf/off the closed
caption feature (page 78}1
o A closed caption signal may not display correcdy in the following situations: a}1when a videotape has
been dubbed; b}1whet/the signal reception is weak; or c}1whet/the signal reception is nonstandard
{page 78}1.
o [fyou forget your PiN code: Whilethe PINcode entering screen isdisplayed, press RECALLfour times
within 5 seconds. ThePIN code you stored will be reset (page 88}1.
o The\!-Chip feature is available for the U.S.\!-Chip system only {page 89}.
o Ifyou use the TV'sremote control to start recording, you wi]] not be able to change inputs {page 88}1
change channels {page 69}1,open the POPwindow (page 73}1or open the FAVSCAN muki-window
{page 75}1.If you attempt to do so,the message "Not AvailableWhile Recording" will appear on-screen.
o [t is recommended that you usethe TV's remote control to start recordir/g. If you use a device other than
the TV's remote control to stalt recording and then attempt to access a feature that is normally denied
during recording (POPmode FAVSCAN mode, changing inputs, changing channels}1the recorded
audio arid/or video maynot be what you intended to record. See pages 88, 89, 74, and 75
o [fyou connecteda SymbioAVHD recorder,in order to useitsfull functionality,you mustfirst set up theTV
GuideOnScreensystem{page 23 and Chapter5}1.
o if your TV's problem has not beersaddressed in this '[_oubleshootir/gsectior/or the recon/mer/ded
solution biasno{ worked, use the Restore FactoryDefaults procedure as described on page 51.
÷
HM94(E}O92-97(10-Trbl)
93
Copyright @ 2004 TOSHIBA CORPORATION, All rights reserved,
÷
8/31/O4,11:41 AM
93
r