Manual

A ÷ L
Adjustingthe picture
Selecting the picture mode
Youcan sdectyour desiredpicture setth_gsfrom fbur picture
modes, as described below.
To select the picture mode:
Press PIC MODE on the remote
control The fbllowing popup menu
appears or>screen.
Repeatedly press PIC MODE Pig
" MODE-
to cycle among the modes.
C'L_L. uLk_3 __,mj _
To select the picture mode using the menu system:
1_ Press MENU and open the VIDEO menu_
2. Highlight PICTURE SETTINGS and press ENTER.
3. Press _' to highlight she bfODE field, and then 4 _ to
select the mode you prefer.
4. To temporarily save the mode you selected, highlight
DONE and press ENTER.
Note: Temporarily saved settings wiiI apply until the
s°,<ee{scha ge".........................
To permanerltly save the mode you selected highlight
SAVE and press ENTER.
Note:
• Thepk;turemodeyouselected/s/orthecurren_/eput
selectk)n only (ANT 7 /n the example abovej You can select
a di/lYererrtp/brute teode for each/77pt£ select/on
, ffyause/ectaneofthe_cteiysetp/bturemodes(SPORTS,
STANDARD,ofMOI//Ejandthenchangeap/brutequa/£y
sett/hg (for exnmp/e, increasethecont/_stOf change the
color_rrlper_ture), the p/brute mode automatically changes
_bPREFERENCE/ntheP/bruteSetY/ngsmerltJ
Adjusting the picture quality
You can adjust the picture quality (comrast, brightness, color,
tint, and sharpness) to your personal pre_brences.
To adiust the pictt_e quality:
1. Press MENU and open the VIDEO menu.
2. Highlight PICTURE SETTINGS and press ENTER.
3. Press _ or _ to sdect the picture quality you warn to adjust
(CONTRAST, BRIGHTNESS, COLOR, TINT, or
SHARPNESS), and then @ and _ to adjust the setdng, as
described in the table bdow.
{_Navigate _Select _[_Back _ _£xit
contrast lower higher
brightness darker lighter
color paler deeper
tint reddish greenish
sharpness softer sharpe_
4. To temporarily save the new seuings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
Note: 7q_esettingsyou selectedare tot the cuffentinput selection
Of7/_/ (ANT 7b tl_eexampb above__u carsselectciifferent
settirtgsfor eachklput selection
The picture qualities you adjusted are automatically saved in the
PREFERENCE mode (see '<Sdectir_gthe picture mode," above
left).
Resetting the picture settings
To reset the picture settings to their [actory values;
1. Highlight RESET in the Picture Settings menu and press
ENTER.
2. Highlight SAVE and press ENTER.
Note: _7/sresetsthepicturessettlhgsk)r thecurrent/hput soureeonly
(ANT _/hthisexarep/e)
÷
HM94(E)07(
76
-81(8b-UseTV) 76
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved,
÷
8131/04, 2:44 PM
[