Manual

8crNlingthe TheaterWide picture
(TheaterWide2 and 3 oNy)
You can set separate scroll settings for TheaterWide 2 and
TheaterWide 3 modes.
To set the scroll settings:
1. Press MENU and open d_eVIDEO metal.
2. Highlight THEATER SETTINGS and press ENTER.
Usingthe auto aspect ratio feature
When the AUTO ASPECT fbature is set to ON and one oldie
fbllowing input sources is received, the picture size is
automatically sdected (as described in the table below):
A 480i signal from d_eVIDEO 1, VIDEO 2, VIDEO 3,
ColorStream HD-1, or ColorStream HD-2 input.
A 480i or 480p signal from the HDMI input.
3. In the PICTURE SIZE fidd, sdect either TheaterWide 2
or TheaterWide 3 (you cannot scroll in any other mode).
4. Press Y to highlight the PICTURE SCROLL rid&
5. Press 4 or _ to scrolI the picture tip and down as needed,
fi'om -10 to +20.
;'i_ a* {>
6. To save your scrolI settings temporarily, highlight DONE
and press ENTER.
To save your scrolI settings permanendy, highlight SAVE
and press ENTER.
4:3 normal Natural (with side bars]
4:3 letter box TheaterWide 2
16:9 full Full
Not defined
(no ID-1 data or ) User-selected picture size
HDMI aspect data] [see pages 64-65]
Note:
• TheAU7-OAgPFCTfe_tumisr_otapp/ic;_bletoantennaor(?;_hleinput
SOtJfC_S
, 2_eAUTDASPECTfeatum is notawti/able when the POP
double window/s open, the FREEZE mode is active, of the TV Guide
Of? ._cl_e/l system iS ape/7
% turn on the AUTO ASPECT feature:
1, Press MENU and open the VIDEO metro,
2, Highlight THEATER SETTINGS and press ENTER.
3. In the AUTO ASPECT RATIO rid& select ON.
4_ To save your settings temporaril> highlight DONE and
press ENTER.
To save your seuings permaner_dy, highlight SAVE and
press ENTER.
To turn off the AUTO ASPECT feattu:e:
Sdect OFF in step 3 above.
÷
HM94(E)066-75(8a-UseTV)
Copyright @)2004 TOSHIBA CORPORATION, All rights reserved.
÷
8/31/04, 2:37 PM
71