Manual

A ÷ L
LabeJingthe videoinputsources
You can labd each video input source according co the B,_>eof
device you connected to each source, from the tbHowing preset
list of'labds:
- - (d<fk.ll&Dd)
Hide (soDideuss...sed i.t.,._ i. lDeS.t.,._.$'ele_do._Ji.dow)
Audio Receiver
VCR
Video Recorder
Laser Disk
Compact Disc
DVD
DTV
Sacdlite/DSS
Cable
Note:
• If you set up devices in Theater?\let,Tr_the associated inputs _ee
automatically lilbebd and cannot be fe/uDeled urlU/you remove
the devk'e from Tl?eaterHet (see page 44)
• If you set up a cable box in WDEO L it willautomatically be labeled and
c'r;,nnotbe re/obe/ed Ur]ti/ yOU r_ITTOV_ the device frenl the TVGuide On
Sc'I_eslsetup
• X_ucnllnot select IEEE 1394 devices thmlKqh the INPUTSELECTION
windobx howeve/; yau can select and contie/ IEEE 7394 Uevices
thiolLqh TheateetJet (see page 44)
To label the video input sources:
1. Press MENU and open the PREFERENCES menu.
2. Highlight INPUT LABELING and press ENTER.
3. Press _' or & co highlight the video source you want to
label
>
Press _llor 1_to select the desired label for that input source.
If a particular input is nor used, you can select '<HIDDEN"
as the label, which will cause chat input co be '<grayedout"
in the input Iiscarid skipped over when you press the
INPUT button on the remote control.
Note: ff you select "HIDDEN" for all of the input/abe& U)e
POP feature wi2be c/isab/ecLif you theft attempt to access the
POP featur_ rite message "Not avnl7Jble"w12appear on street7
5. To save the labels, highlight SAVE and press ENTER,
Input labeling example:
If you connecE a VCR to VIDEO 1, a DVD player to
ColorScream HD-1, and a high definitkm sateIlite receiver to
HDMI, and then label the video input sources accordingly (as
shown in step 4 at left), when you press INPUT or TV/V{DEO,
the INPUT SELECTION screen would look like the screen
below right:
InputSelectionscreen
with no inputs labeled
Input Selection screen with
inputs 1,4, arid 6 labeled,
and input 5 hidden,
To clear the input labels:
1. Press MENU and open the PREFERENCES menu,
2. Highlight INPUT LABELING and press ENTER.
3. Highlight RESET and press ENTER.
4, Highlight SAVE and press ENTER.
a ,* _S
gZN
Note: L_;belsfor devk:esyou set up kl 771eaterNetwill not be
cleared unti/ you remove the device Dora TheaterNet (_ee
page 44) The screen above f/}'ht i//ust/ates an example of the
input Labeling sc/een a_er it was reset that still shows the
VCR label _r VIDEO 7 because d_e VCR v>_sset up in
Theater#'eL
÷
HM94(E)066-75(8a-UseTV)
67
Copyright _) 2004 TOSHIBA CORPORATION, All rights reserved.
÷
8/31/04, 2:37 PM
67