Manual

Viewingthe digital signal meter
Yoltcan _iew d_edigkal sigrml meter fbr ANT 1 and ANT 2
digkal TV input sources only.
To view the digital signal meter:
1. Press MENU and open the SETUP men,.
Z HigNight INSTALLATION and press ENTER. (A new set
of INSTALLATION men. icons will appear on-screen, as
shown in step 3 below.)
3. Open the TERRESTRIAL menu, high[ight SIGNAL
METER, and press ENTER.
_Navigate K_tSelect _J_Sack _;._Exit
4, Use the AV4 _" buttons to sdect the ar_terma input and
digital chamld whose signal you want to check.
Note; The phi/sited 4//iq/tgd channel numbe_ &ted in tl_e5;ignal
Mete/ screenmaynot co_mspondto a vi£ualFVchannel
/lumbet: Contactyour /oca/bmadcastet__)obtgdnthe RF
channd numbe/stotyour local d/9'/ta/s_alYof?s
To close the screen and return to the TERRESTRIAL menu:
Highlight OK and press ENTER.
To rett_rn to normal viewing:
Press EXIT.
Viewingthe system status
To check the system status:
1. Press MENU and open the SETUP merit:.
2. Highlight INSTALLATION and press ENTER. (A new set
of'INSTALLATION memt icons will appear on-screen, as
shown iri step 3),
3. Open the SYSTEM STATUS menu, highlight SYSTEM
INFORMATION, and then press ENTER.
_Navigate _NSelect _,_Y_Back
4. Use the _ _ buttons to scroll through the memt bar to
check the Product Inf_)rmation and Sof'rware Version.
To close the screeu arid return to the INSTALLATION
menu: Highlight OK and press ENTER.
To return to normal viewing: Press EXIT.
Restore Factory Defa_Rs
To restore a[[se_dngs and cham_ds to their f_ctory def_ttlt
_a[ttes:
1. Follow steps 1-3 aboxe.
2. Use the @ _ buttons to scroll through the menu bar to
sdect FACTORY DEFAULTS.
3. The screen bdow [eft appears. Enter your PIN code (or
0000 if"no PIN code has been set). T'he screen bdow right
appears.
To cancel the reset: Highlight NO and press ENTER.
To continue the reset process: Highlight YES and press
ENTER. The TV svill tttm off automatically af'_era fbw
seconds. Af'_erthe TV turns off',tmpIug the TV power cord
and then pltig it in again to complete the restore.
This window provides the ability to reset
the TVsettings•
Type in your PiN now (ol "0000" if no PiN
has been set)to lestole settings to their
actory de au tva ues.
PressYES to confilln After the TV
[A tu,ns off, unp]u0 it andpk,0 it
÷
HM94(E)044-51(6b-Setup)
Copyright @ 2004 TOSHIBA CORPORATION, All rights reserved,
÷
8131/04, 2:10 PM
51
[