Manual

[mportant Safety [nstructions
0
2]
s]
4]
5]
6]
7]
Read these instructions.
Keep these instructions.
Heed aH warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Insta[I in
accordance with the manufacturer's instructions.
8) Do not install near any beat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9] Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding Wideplug
prong. The wide blade or the third
prong are provided for your safety'.
If the provided plug does not fit into
your outlet, consuk an electrician
for replacement of the obsolete outiet.
10] Protect the power cord from being
walked on or pinched, particularly at
pIugs, convenience receptacles, and
the point where it exits the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use onmy with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13] Unplug this apparatus during [ightnhlg storms or
when unused for long periods of time.
14] Refer aH servicing to qualified service personnel
Servicing is required when the apparatus has been
damaged in any way, such as power-suppIy cord or pIug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, or the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped. This applies to a[[ items except those
specified on pages 98-100 of this manual.
15)
16)
CAUTION: To reduce the risk of etectric shock, do not
use the poIarized piug with an extension cord, receptacle,
or other outlet unless the bIades can be inserted completely
to prevent blade exposure.
WARNING: This product contains a lamp to project
the picture, and requires special safety precautions:
° See pages 98-100 for instructions on [amp unit
replacement and care.
o DO NOT attempt to service this product except as
specified on pages 98-100. The only user-serviceable
item in this product is the [amp unK.
hlstallation, Care, and Service
installation
Foilow these recommendations and precautions and heed all
warnings when installing your TV:
17] Never modify' this equipment. Changes or modifications
may void: a) the warranty', and b) the user's authority to
operate this equipment under the mles of the Federal
Communications Commission.
18)
DANGER: RiSK OF SERmOUS PERSONAL
raNJURY, DEATH, OR EQUmPMENT
DAMAGE. _Never place the TV on
an unstable cart, stand, or table. The TV
may fail, causing serious personal injury,
death, or sedous damage to the TV.
19] Never place or store the TV in direct sunlight; hot, humid
areas; areas subject to excessive dust or vibration; or
locations with temperatures at or below 41°F (5°C).
20) Always place the TV on the floor or a sturdy, level, stable
surface that can support the weight of the unit.
21] Never expose the apparatus to dripping or splashing or
place items such as vases, aquariums, any other item filled
with liquid, or candies on top of the TV.
22] Always place the back of the television at least one (1]
inch away from any vertical surface (such as a wall) to
allow proper ventilation.
23) Never block or cover the slots or openings in the TV
cabinet back, bottom, and sides. Never place the TV:
* on a bed, sofa, rag, or similar surface;
, too close to drapes, curtains, or walls; or
* in a confined space such as a bookcase, built-in cabinet,
or any other place with poor ventilation.
The slots and openings are provided to protect the TV
from overheating and to help maintain reliable operation
of the TV.
24] Never allow anything to rest on or rotI over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
25) Never overload wall outlets and extension cords.
26) Always operate this equipment from a 120 VAC, 60 Hz
power source only.
(conlinued onnext padej
÷
3
HM94(E)002-04 3 ÷
8/30/04,10:58 AM
F